EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Anisotropy in Microstructure and Corrosion Behavior of NiTi Alloys Produced by Laser Powder Bed Fusion

Chenglong Teng, Yi-Fan Zhang, Hui Xiao, Yun-Fei Pei, Liang-Yu Chen

Metals · 02.07.2026 · 16 (7) · 731

DOI: 10.3390/met16070731 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 02.07.2026. Verfasst von Chenglong Teng und 4 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Program of Jiangsu Provincial Market Regulatory Administration.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion (LPBF) induces pronounced microstructural anisotropy in NiTi alloys, which strongly governs their corrosion behavior in physiological environments. Here, the orientation-dependent microstructure and corrosion performance of LPBF NiTi alloys were systematically investigated on the XY (perpendicular to build direction) and XZ (parallel to build direction) planes. The XY plane is dominated by polygonal B2 grains, whereas semi-quantitative XRD analysis and TEM observations indicate a relatively larger contribution of lamellar B19′ martensite on the XZ plane. Electrochemical tests in Hank’s solution (pH 3–7) reveal pronounced corrosion anisotropy. At pH 7, the XZ plane exhibits a higher charge transfer resistance (143.9 vs. 109.1 kΩ cm2) and a lower corrosion current density (0.231 vs. 0.599 μA cm−2) than the XY plane. After 72 h immersion, the Rct of the XZ plane remains approximately 31% higher than that of the XY plane at pH 7, while its apparent donor density is lower than that of the XY plane at pH 3 (7.38 × 1029 vs. 12.33 × 1029 cm−3). The superior electrochemical response of the XZ plane correlates with its denser lamellar B19′ morphology and lower passive-film donor density. Competition between interface-assisted passivation and interface-related electrochemical heterogeneity is proposed as a possible contributor to the anisotropic corrosion response.

Förderung

  • Science and Technology Program of Jiangsu Provincial Market Regulatory Administration

Zitieren

APA

Teng, C., Zhang, Y., Xiao, H., Pei, Y., & Chen, L. (2026). Anisotropy in Microstructure and Corrosion Behavior of NiTi Alloys Produced by Laser Powder Bed Fusion. Metals, 16(7), 731. https://doi.org/10.3390/met16070731

Vancouver

Teng C, Zhang Y, Xiao H, Pei Y, Chen L. Anisotropy in Microstructure and Corrosion Behavior of NiTi Alloys Produced by Laser Powder Bed Fusion. Metals. 2026;16(7):731. doi:10.3390/met16070731

BibTeX
@article{Teng2026,
  author = {Teng, Chenglong and Zhang, Yi-Fan and Xiao, Hui and Pei, Yun-Fei and Chen, Liang-Yu},
  title = {Anisotropy in Microstructure and Corrosion Behavior of NiTi Alloys Produced by Laser Powder Bed Fusion},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {731},
  doi = {10.3390/met16070731}
}
Kostenlos starten →