EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study of Directionality Effects in Three-Beam Coaxial Titanium Wire-Based Laser Metal Deposition

Remy Mathenia, Braden McLain, Todd Sparks, Frank Liou iD

Materials · 30.06.2024 · 17 (13) · 3201

DOI: 10.3390/ma17133201 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.06.2024. Verfasst von Remy Mathenia und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Aerospace Engineering, Missouri University of Science and Technology, Rolla, MO 65409, USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: GKN Aerospace and the Center for Aerospace Manufacturing Technologies (CAMT), Missouri University of Science and Technology’s Kummer Institute for Student Success, Research, and Economic Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Coaxial wire-based laser metal deposition is a versatile and efficient additive process that can achieve a high deposition rate in the manufacturing of complex structures. In this paper, a three-beam coaxial wire system is studied, with particular attention given to the effects of the deposition direction and laser beam orientation on the resulting bead geometry symmetry. With the three-beam laser delivery, the laser spot pattern is not always symmetric with respect to the deposition direction. Single titanium beads are deposited in different directions and at varying deposition rates, and the bead profile is quantitatively scored for multiple symmetry measures. Through an analysis of variance, the deposition direction and deposition rate were found to be insignificant with respect to the resulting bead symmetry for the developed measures. The bead symmetry and geometry are important factors in determining if a build is free of critical defects, and in this study, it is shown that the three-beam coaxial wire deposition setup is a directionally independent process.

Schlagwörter

Stichwörter der Autor:innen

bead geometrydefocusingthree-beam coaxial laserwire deposition

Autor:innen und Institutionen

  • Department of Mechanical and Aerospace Engineering, Missouri University of Science and Technology, Rolla, MO 65409, USA.
  • Product Innovation and Engineering, St. James, MO 65559, USA.

ORCID-Profile: Frank Liou

Förderung

  • GKN Aerospace and the Center for Aerospace Manufacturing Technologies (CAMT)
  • Missouri University of Science and Technology’s Kummer Institute for Student Success, Research, and Economic Development

Zitieren

APA

Mathenia, R., McLain, B., Sparks, T., & Liou, F. (2024). A Study of Directionality Effects in Three-Beam Coaxial Titanium Wire-Based Laser Metal Deposition. Materials, 17(13), 3201. https://doi.org/10.3390/ma17133201

Vancouver

Mathenia R, McLain B, Sparks T, Liou F. A Study of Directionality Effects in Three-Beam Coaxial Titanium Wire-Based Laser Metal Deposition. Materials. 2024;17(13):3201. doi:10.3390/ma17133201

BibTeX
@article{Mathenia2024,
  author = {Mathenia, Remy and McLain, Braden and Sparks, Todd and Liou, Frank},
  title = {A Study of Directionality Effects in Three-Beam Coaxial Titanium Wire-Based Laser Metal Deposition},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3201},
  doi = {10.3390/ma17133201}
}
Kostenlos starten →