EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Hybridization of Epoxy–Glass Laminates Modified with Metal Oxides and Graphite Particles

Cezary Drenda iD, Przemysław Nosal iD, Kamil Badura iD, Patrycja Bazan iD

Materials · 28.06.2024 · 17 (13) · 3175

DOI: 10.3390/ma17133175 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.06.2024. Verfasst von Cezary Drenda und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Machine Design and Maintenance, Faculty of Mechanical Engineering and Robotics, AGH University of Krakow, al. A. Mickiewicza 30, 30-059…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Machine Design and Maintenance (AGH University of Krakow).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examined the impact of hybridization on the mechanical properties of glass–epoxy laminates by incorporating metal oxides and graphite particles into the resin matrix. Basic mechanical tests were conducted, followed by accelerated thermal aging tests. Results showed an increase in bending strength ranging from 12% to almost 30% depending on the used additive. Static tensile tests indicated a 10% increase in strength for materials modified with flake graphite. Accelerated aging tests resulted in a 20% decrease in elastic modulus and 10% decrease in tensile strength. Additives did not improve tensile strength but increased stiffness by 30% for laminates with flake graphite. Fatigue and conductivity tests were also performed, revealing enhanced thermal conductivity and reduced impedance in materials modified with graphite flakes. The study suggests that additives can enhance the mechanical properties of glass–epoxy laminates, making them suitable for applications in automotive and aerospace industries.

Schlagwörter

Stichwörter der Autor:innen

agingepoxy–glass laminatemechanical propertiesthermal conductivity

Autor:innen und Institutionen

  • Department of Machine Design and Maintenance, Faculty of Mechanical Engineering and Robotics, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland.
  • SHM System Sp. z o.o., Sp. kom. Libertów, ul Jana Pawła II 82A, 30-444 Krakow, Poland.
  • Chair of Material Engineering and Physics, Cracow University of Technology, 31-155 Krakow, Poland.

ORCID-Profile: Cezary Drenda, Przemysław Nosal, Kamil Badura, Patrycja Bazan

Förderung

  • Department of Machine Design and Maintenance (AGH University of Krakow)

Zitieren

APA

Drenda, C., Nosal, P., Badura, K., & Bazan, P. (2024). The Influence of Hybridization of Epoxy–Glass Laminates Modified with Metal Oxides and Graphite Particles. Materials, 17(13), 3175. https://doi.org/10.3390/ma17133175

Vancouver

Drenda C, Nosal P, Badura K, Bazan P. The Influence of Hybridization of Epoxy–Glass Laminates Modified with Metal Oxides and Graphite Particles. Materials. 2024;17(13):3175. doi:10.3390/ma17133175

BibTeX
@article{Drenda2024,
  author = {Drenda, Cezary and Nosal, Przemysław and Badura, Kamil and Bazan, Patrycja},
  title = {The Influence of Hybridization of Epoxy–Glass Laminates Modified with Metal Oxides and Graphite Particles},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3175},
  doi = {10.3390/ma17133175}
}
Kostenlos starten →