Influence of S-Glass and E-Glass Hybridization on the Mechanical Properties of Epoxy-Based Composite Laminates
Fibers · 25.08.2026 · 14 (9) · 97
DOI: 10.3390/fib14090097 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fibers, online erschienen am 25.08.2026. Verfasst von J. P. Rishi und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 94 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The aim of this study is to investigate the mechanical performance of S-glass and E-glass fiber-reinforced epoxy composites manufactured using the hand-layup technique with epoxy resin (Lapox L-12) and hardener (K-6), cured for 24 h at room temperature. To investigate the effect of different configurations, six configurations were tested: pure S-glass/epoxy (Sc-E), pure E-glass/epoxy (Ec-E), and four combinations of S-glass/E-glass at different stacking sequences (1Hc-E, 2Hc-E, 3Hc-E, and 4Hc-E). All composites were fabricated with 60 wt% fiber and 40 wt% matrix. Mechanical characterization comprised tensile testing (crosshead speed 10 mm/min), three-point bending tests for flexural properties (5 mm/min), interlaminar shear strength (ILSS) testing (3 mm/min), and Shore D and Barcol hardness testing. The results showed that the ultimate tensile strength (188.42 MPa) and Young’s modulus (1.60 GPa) were highest for the Ec-E sample, while the peak load (8903.02 N) was highest for the Ec-E sample. For flexural properties, the 1Hc-E hybrid configuration (ss-ee-ss-ee) exhibited an excellent flexural strength of 416.60 MPa and a flexural modulus of 26.08 GPa, indicating a positive hybrid effect. The pure S-glass composites showed the best ILSS (16.52 MPa) and hardness properties. The study revealed that flexural properties can be optimized through strategic hybridization and that fiber stacking sequence has a significant effect on interlaminar properties.
Zitieren
APA
Rishi, J. P., Bilwa, R. M., Kumar, V. S. N., Rajesh, S. M., Anjum, N., Sandeep, B., & Puttaswamy, M. (2026). Influence of S-Glass and E-Glass Hybridization on the Mechanical Properties of Epoxy-Based Composite Laminates. Fibers, 14(9), 97. https://doi.org/10.3390/fib14090097
Vancouver
Rishi JP, Bilwa RM, Kumar VSN, Rajesh SM, Anjum N, Sandeep B, et al. Influence of S-Glass and E-Glass Hybridization on the Mechanical Properties of Epoxy-Based Composite Laminates. Fibers. 2026;14(9):97. doi:10.3390/fib14090097
BibTeX
@article{Rishi2026,
author = {Rishi, J. P. and Bilwa, Rakesh Mahesh and Kumar, V. S. Niranjan and Rajesh, S. M. and Anjum, Naveed and Sandeep, B. and Puttaswamy, Madhusudan},
title = {Influence of S-Glass and E-Glass Hybridization on the Mechanical Properties of Epoxy-Based Composite Laminates},
journal = {Fibers},
year = {2026},
volume = {14},
number = {9},
pages = {97},
doi = {10.3390/fib14090097}
}
EUVIMED