EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating the Impact of Superabsorbent Polymer Sizes on Absorption and Cement Paste Rheology

Nilam Adsul iD, Jun-Woo Lee, Su-Tae Kang

Materials · 25.06.2024 · 17 (13) · 3115

DOI: 10.3390/ma17133115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.06.2024. Verfasst von Nilam Adsul und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Daegu University, Gyeongsan 38453, Republic of Korea. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to understand the water retention capabilities of Superabsorbent Polymers (SAPs) in different alkaline environments for internal curing and to assess their impact on the rheological properties of cement paste. Therefore, the focus of this paper is on the absorption capacities of two different sizes of polyacrylic-based Superabsorbent Polymers : SAP A, with an average size of 28 µm, and SAP B, with an average size of 80 µm, in various solutions, such as pH 7, pH 11, pH 13, and cement filtrate solution (pH 13.73). Additionally, the study investigates the rheological properties of SAP-modified cement pastes, considering three different water-to-cement (w/c) ratios (0.4, 0.5, and 0.6) and four different dosages of SAPs (0.2%, 0.3%, 0.4%, and 0.5% by weight of cement). The results showed that the absorption capacity of SAP A was higher in all solutions compared to SAP B. However, both SAPs exhibited lower absorption capacity and early desorption in the cement filtrate solution. In contrast to the absorption results in pH 13 and cement filtrate solutions, the rheological properties, including plastic viscosity and yield stress, of the cement paste with a w/c ratio of 0.4 and 0.5, as well as both dry and wet (presoaked) SAPs, were higher than those of the cement paste without SAP, indicating continuous absorption by SAP. The viscosity and yield stress increased over time with increasing SAP dosage. However, in the mixes with a w/c ratio of 0.6, the values of plastic viscosity and yield stress were initially lower for the mixes with dry SAPs compared to the reference mix. Additionally, cement pastes containing wet SAP showed higher viscosity and yield stress compared to the pastes containing dry SAP.

Schlagwörter

Stichwörter der Autor:innen

absorption capacitycement pasteplastic viscositysuperabsorbent polymerwater-to-cement ratioyield stress

Autor:innen und Institutionen

  • Department of Civil Engineering, Daegu University, Gyeongsan 38453, Republic of Korea.
  • Department of Architecture Engineering, Daegu University, Gyeongsan 38453, Republic of Korea.

ORCID-Profile: Nilam Adsul

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Adsul, N., Lee, J. W., & Kang, S. T. (2024). Investigating the Impact of Superabsorbent Polymer Sizes on Absorption and Cement Paste Rheology. Materials, 17(13), 3115. https://doi.org/10.3390/ma17133115

Vancouver

Adsul N, Lee JW, Kang ST. Investigating the Impact of Superabsorbent Polymer Sizes on Absorption and Cement Paste Rheology. Materials. 2024;17(13):3115. doi:10.3390/ma17133115

BibTeX
@article{Adsul2024,
  author = {Adsul, Nilam and Lee, Jun-Woo and Kang, Su-Tae},
  title = {Investigating the Impact of Superabsorbent Polymer Sizes on Absorption and Cement Paste Rheology},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3115},
  doi = {10.3390/ma17133115}
}
Kostenlos starten →