Research of Water Absorption and Release Mechanism of Superabsorbent Polymer in Cement Paste
Polymers · 16.07.2023 · 15 (14) · 3062
DOI: 10.3390/polym15143062 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 16.07.2023. Verfasst von Xiao Qin und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Transportation and Civil Engineering and Architecture, Foshan University, Foshan 528225, China. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Guangdong Province, National Natural Science Foundation of China, Yongjiang plan of Nanning.
Abstract (Originalsprache)
The water absorption and release properties of superabsorbent polymers’ (SAP) internal curing agent are affected by many factors, such as solution properties, the ambient temperature and humidity and the particle size of SAP, which determine the curing effect and the durability of cement concrete structures directly. In this paper, the variation rule of the water absorbing capacity of SAP in simulated cement paste under different solutions and environmental conditions was studied. Based on microscopic image technology, the dynamic swelling behavior of the SAP particles was explored. The water release performance of SAP in cement paste was analyzed by both the tracer method and the negative pressure method. The results show that the water absorption of SAP in cement paste varied from 27 to 33 times. The ionic valence had a significant effect on the water absorption capacity of SAP, which suggests that the larger the ionic radius, the lower the absorption of SAP. The higher the temperature of the solution, the greater the water absorption rate of SAP. While the SAP particle size was less than 40–80 mesh, a slight ‘agglomeration effect’ was prone to occur, but the absorption state of SAP was more stable. Based on the swelling kinetic equation of SAP and the time-dependent swelling morphology of SAP in cement paste, a swelling kinetic model was established. The water release performance of SAP was less affected by the capillary negative pressures, and it would not release the water prematurely during the plastic stage, which was conducive to the continuous internal curing process of hardened paste in the later stage.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Transportation and Civil Engineering and Architecture, Foshan University, Foshan 528225, China.
- Guangdong GuanYue Highway and Bridge Co., Ltd., Guangzhou 511450, China.
- School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou 510006, China.
- Guangxi Key Lab of Road Structure and Materials, Nanning 530007, China.
Förderung
- Natural Science Foundation of Guangdong Province
- National Natural Science Foundation of China
- Yongjiang plan of Nanning
- Guangdong University Students Science and Technology Innovation Cultivation Special Funding Project
- Guangdong University Students’ Science and Technology Innovation Cultivation Special Funding Project
Zitieren
APA
Qin, X., Lin, Y., Mao, J., Sun, X., Xie, Z., & Huang, Q. (2023). Research of Water Absorption and Release Mechanism of Superabsorbent Polymer in Cement Paste. Polymers, 15(14), 3062. https://doi.org/10.3390/polym15143062
Vancouver
Qin X, Lin Y, Mao J, Sun X, Xie Z, Huang Q. Research of Water Absorption and Release Mechanism of Superabsorbent Polymer in Cement Paste. Polymers. 2023;15(14):3062. doi:10.3390/polym15143062
BibTeX
@article{Qin2023,
author = {Qin, Xiao and Lin, Yongkang and Mao, Jie and Sun, Xiaolong and Xie, Zhengzhuan and Huang, Qingjian},
title = {Research of Water Absorption and Release Mechanism of Superabsorbent Polymer in Cement Paste},
journal = {Polymers},
year = {2023},
volume = {15},
number = {14},
pages = {3062},
doi = {10.3390/polym15143062}
}
EUVIMED