EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Cementitious Material with Thermal-Activated Lead–Zinc Tailings Based on Response Surface Methodology

Hang Lin iD, Ziyi Yin, Su Li

Materials · 14.06.2024 · 17 (12) · 2926

DOI: 10.3390/ma17122926 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.06.2024. Verfasst von Hang Lin und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Resources and Safety Engineering, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hunan Provincial Natural Science Foundation of China, Guizhou Provincial Major Scientific and Technological Program, Hunan provincial key research and development Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The accumulation of lead–zinc tailings will cause a series of problems, including geological disasters and environmental pollution. Efficient secondary utilization of lead–zinc tailings is crucial. In this study, the activity of lead–zinc tailings was stimulated by thermal activation. The optimal thermal activation parameters are a thermal activation temperature of 900 °C and a holding time of 30 min. Based on the response surface methodology, the effect of raw materials content on cementitious material strength was analyzed, and the relational model between cementitious material strength and experimental variables was established. The results show that the sensitivity order of cementitious material strength at 28 days curing age is sand/cement ratio > water/cement ratio > fly ash content > tailing content. According to the relational model, the optimal materials ratio is as follows: tailing/fly ash/cement = 28.99%:14.58%:56.43%, and the sand/binder ratio and water/binder ratio are 1:1 and 0.47, respectively. The corresponding cost is CNY 290.965 per ton, which is the lowest. The strength of cementitious material with these parameters can reach 20 MPa, which meets the requirements of “Technical specification for application of solid waste cementitious material (T/CECS 689-2020)”.

Schlagwörter

Stichwörter der Autor:innen

cementitious materialcompression testlead–zinc tailingsoptimal material ratiothermal activation

Autor:innen und Institutionen

  • School of Resources and Safety Engineering, Central South University, Changsha 410083, China.

ORCID-Profile: Hang Lin

Förderung

  • Hunan Provincial Natural Science Foundation of China
  • Guizhou Provincial Major Scientific and Technological Program
  • Hunan provincial key research and development Program

Zitieren

APA

Lin, H., Yin, Z., & Li, S. (2024). Optimization of Cementitious Material with Thermal-Activated Lead–Zinc Tailings Based on Response Surface Methodology. Materials, 17(12), 2926. https://doi.org/10.3390/ma17122926

Vancouver

Lin H, Yin Z, Li S. Optimization of Cementitious Material with Thermal-Activated Lead–Zinc Tailings Based on Response Surface Methodology. Materials. 2024;17(12):2926. doi:10.3390/ma17122926

BibTeX
@article{Lin2024,
  author = {Lin, Hang and Yin, Ziyi and Li, Su},
  title = {Optimization of Cementitious Material with Thermal-Activated Lead–Zinc Tailings Based on Response Surface Methodology},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {12},
  pages = {2926},
  doi = {10.3390/ma17122926}
}
Kostenlos starten →