EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sand Mining Tailings as Supplementary Cementitious Material

Aline Santana Figueiredo, Augusto Cesar da Silva Bezerra, Laís Cristina Barbosa Costa, Douglas Mol Resende, Luana Drago Kuster, Ricardo André Fiorotti Peixoto

Buildings · 04.08.2024 · 14 (8) · 2408

DOI: 10.3390/buildings14082408 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 04.08.2024. Verfasst von Aline Santana Figueiredo und 5 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordination for the Improvement of Higher Education Personnel, Ministry of Science, Technology, Innovation and Communications, National Council for Scientific and Technological Development (CNPq).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sand mining tailing (ST) is a byproduct of the sand extraction of submerged pits, a process which is carried out to obtain aggregates for civil construction. This tailing consists of fine particles from the pulp washing process, usually disposed of in decantation ponds. The present study proposes ST as a supplementary cementitious material (SCM) for Portland cement concrete, thereby reintegrating this tailing into the production chain. In this sense, ST was characterized, and concretes containing 2% to 14% of cement replacement (%vol) by ST were produced and evaluated. STs showed natural fineness, particles with angular morphology, a significant amount of kaolinite, and 36% amorphous content. ST concretes exhibited a compressive strength of up to 57.9 MPa at 28 days under 7.0% of cement replacement, 38.8% higher than the reference. Consequently, only 5.6 kg/m3 of Portland cement was required to attain 1.0 MPa, representing a 33.6% reduction compared to the reference. The ultrasonic pulse velocities measured in ST concrete with 2.0%, 4.0%, 7.0%, and 14.0% cement replacement were 3.0%, 6.1%, 9.3%, and 6.6% higher than the reference, respectively. These results indicate enhanced mechanical properties, improved matrix uniformity, and superior environmental performance across all SCM levels compared to the reference, with optimal efficiency observed at 7.0% ST content.

Förderung

  • Coordination for the Improvement of Higher Education Personnel
  • Ministry of Science, Technology, Innovation and Communications
  • National Council for Scientific and Technological Development (CNPq)
  • agencies CAPES
  • FAPEMIG

Zitieren

APA

Figueiredo, A. S., Bezerra, A. C. D. S., Costa, L. C. B., Resende, D. M., Kuster, L. D., & Peixoto, R. A. F. (2024). Sand Mining Tailings as Supplementary Cementitious Material. Buildings, 14(8), 2408. https://doi.org/10.3390/buildings14082408

Vancouver

Figueiredo AS, Bezerra ACDS, Costa LCB, Resende DM, Kuster LD, Peixoto RAF. Sand Mining Tailings as Supplementary Cementitious Material. Buildings. 2024;14(8):2408. doi:10.3390/buildings14082408

BibTeX
@article{Figueiredo2024,
  author = {Figueiredo, Aline Santana and Bezerra, Augusto Cesar da Silva and Costa, Laís Cristina Barbosa and Resende, Douglas Mol and Kuster, Luana Drago and Peixoto, Ricardo André Fiorotti},
  title = {Sand Mining Tailings as Supplementary Cementitious Material},
  journal = {Buildings},
  year = {2024},
  volume = {14},
  number = {8},
  pages = {2408},
  doi = {10.3390/buildings14082408}
}
Kostenlos starten →