EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Ceramic Microchannels with Periodic Corrugated Microstructures as Catalyst Support for Hydrogen Production via Diamond Wire Sawing

Xinying Li, Chao Gao, Ding Yuan, Yuanbao Qin, Dongbi Fu, Xiyang Jiang, Wei Zhou iD

Materials · 24.05.2024 · 17 (11) · 2535

DOI: 10.3390/ma17112535 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.05.2024. Verfasst von Xinying Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen 361005, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Major Science and Technology Plan of Xiamen City, Science and Technology Major Program of Fujian Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogen energy is the clean energy with the most potential in the 21st century. The microchannel reactor for methanol steam reforming (MSR) is one of the effective ways to obtain hydrogen. Ceramic materials have the advantages of high temperature resistance, corrosion resistance, and high mechanical strength, and are ideal materials for preparing the catalyst support in microchannel reactors. However, the structure of ceramic materials is hard and brittle, and the feature size of microchannel is generally not more than 1 mm, which is difficult to process using traditional processing methods. Diamond wire saw processing technology is mainly used in the slicing of hard and brittle materials such as sapphire and silicon. In this paper, a microchannel with a periodic corrugated microstructure was fabricated on a ceramic plate using diamond wire sawing, and then as a catalyst support when used in a microreactor for MSR hydrogen production. The effects of wire speed and feed speed on the amplitude and period size of the periodic corrugated microstructure were studied using a single-factor experiment. The microchannel surface morphology was observed via SEM and a 3D confocal laser microscope under different processing parameters. The microchannel samples obtained under different processing parameters were supported by a multiple impregnation method. The loading strength of the catalyst was tested via a strong wind purge experiment. The experimental results show that the periodic corrugated microstructure can significantly enhance the load strength of the catalyst. The microchannel catalyst support with the periodic corrugated microstructure was put into the microreactor for a hydrogen production experiment, and a good hydrogen production effect was obtained. The experimental results have a positive guiding effect on promoting ceramic materials as the microchannel catalyst support for the development of hydrogen energy.

Schlagwörter

Stichwörter der Autor:innen

catalyst supportceramic microchanneldiamond wire sawinghydrogen productionperiodic corrugated microstructure

Autor:innen und Institutionen

  • Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen 361005, China.

ORCID-Profile: Wei Zhou

Förderung

  • National Natural Science Foundation of China
  • Major Science and Technology Plan of Xiamen City
  • Science and Technology Major Program of Fujian Province
  • Science and Technology Major Program of Fujian Province, China
  • Major Science and Technology Plan of Xiamen City, Fujian, China

Zitieren

APA

Li, X., Gao, C., Yuan, D., Qin, Y., Fu, D., Jiang, X., & Zhou, W. (2024). Fabrication of Ceramic Microchannels with Periodic Corrugated Microstructures as Catalyst Support for Hydrogen Production via Diamond Wire Sawing. Materials, 17(11), 2535. https://doi.org/10.3390/ma17112535

Vancouver

Li X, Gao C, Yuan D, Qin Y, Fu D, Jiang X, et al. Fabrication of Ceramic Microchannels with Periodic Corrugated Microstructures as Catalyst Support for Hydrogen Production via Diamond Wire Sawing. Materials. 2024;17(11):2535. doi:10.3390/ma17112535

BibTeX
@article{Li2024,
  author = {Li, Xinying and Gao, Chao and Yuan, Ding and Qin, Yuanbao and Fu, Dongbi and Jiang, Xiyang and Zhou, Wei},
  title = {Fabrication of Ceramic Microchannels with Periodic Corrugated Microstructures as Catalyst Support for Hydrogen Production via Diamond Wire Sawing},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {11},
  pages = {2535},
  doi = {10.3390/ma17112535}
}
Kostenlos starten →