EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on the Hot Straightening Process of Medium-Thick Plates Based on Elastic–Viscoplastic Material Modeling

Zhanyuan Xue, Ben Guan, Yong Zang

Materials · 16.05.2024 · 17 (10) · 2385

DOI: 10.3390/ma17102385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.05.2024. Verfasst von Zhanyuan Xue und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, Scientific and Technological Innovation Foundation of Foshan, USTB, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the continuous improvement in the strength of medium-thick plate materials, the hot straightening of plates at high temperatures is increasingly influencing the final defect characteristics of products. In the high-temperature hot straightening process, the temperature and straightening speed of the plate significantly influence its intrinsic material properties, which, in turn, affect the straightening characteristics of the plate. However, most current material models used in the straightening process do not consider the relationship between temperature and strain rate, which leads to an inaccurate characterization of the actual material structure. Additionally, the continuous reverse bending mechanics model for straightening does not account for the impact of different bending strain rates on the bending characteristics of the plate in the thickness direction. In this study, a numerical calculation method was employed to investigate the evolution process of stress and curvature in the roll-type hot straightening process of medium-thick plates. Experimental data and mathematical methods were utilized to develop a viscous plastic material model that accounted for temperature and strain rate. Furthermore, a cross-sectional continuous reverse bending model was established, taking into account the temperature and straightening speed, enabling a reasonable interpretation of the mechanical parameter behaviors of medium-thick plates during high-temperature straightening.

Schlagwörter

Stichwörter der Autor:innen

cross-sectional continuous reverse bending modelhot straighteningmechanical parameter behaviormedium-thick platenumerical calculationstrain ratetemperatureviscoplastic constitutive model

Autor:innen und Institutionen

  • School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China.
  • Shunde Innovation School, University of Science and Technology Beijing, Foshan 528399, China.

Förderung

  • the National Natural Science Foundation of China
  • Scientific and Technological Innovation Foundation of Foshan, USTB
  • National Natural Science Foundation of China

Zitieren

APA

Xue, Z., Guan, B., & Zang, Y. (2024). Research on the Hot Straightening Process of Medium-Thick Plates Based on Elastic–Viscoplastic Material Modeling. Materials, 17(10), 2385. https://doi.org/10.3390/ma17102385

Vancouver

Xue Z, Guan B, Zang Y. Research on the Hot Straightening Process of Medium-Thick Plates Based on Elastic–Viscoplastic Material Modeling. Materials. 2024;17(10):2385. doi:10.3390/ma17102385

BibTeX
@article{Xue2024,
  author = {Xue, Zhanyuan and Guan, Ben and Zang, Yong},
  title = {Research on the Hot Straightening Process of Medium-Thick Plates Based on Elastic–Viscoplastic Material Modeling},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2385},
  doi = {10.3390/ma17102385}
}
Kostenlos starten →