EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wetting Behavior Driven by Surface Morphology Changes Induced by Picosecond Laser Texturing

Carmelo Corsaro iD, Gabriele Orlando, Gabriele Costa, Mariangela Latino iD, Francesco Barreca iD, Angela Maria Mezzasalma iD, Fortunato Neri iD, Enza Fazio iD

Materials · 09.04.2024 · 17 (8) · 1719

DOI: 10.3390/ma17081719 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.04.2024. Verfasst von Carmelo Corsaro und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mathematical and Computational Sciences, Physics Science and Earth Science, University of Messina, Viale F. Stagno d'Alcontres 31, I-98…. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministero dell'Istruzione e del Merito, European Union (NextGeneration EU), through the MUR-PNRR project SAMOTHRACE.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The laser surface texturing (LST) technique has recently been used to enhance adhesion bond strength in various coating applications and to create structures with controlled hydrophobic or superhydrophobic surfaces. The texturing processing parameters can be adjusted to tune the surface’s polarity, thereby controlling the ratio between the polar and dispersed components of the surface free energy and determining its hydrophobic character. The aim of this work is to systematically select appropriate laser and scan head parameters for high-quality surface topography of metal-based materials. A correlation between texturing parameters and wetting properties was made in view of several technological applications, i.e., for the proper growth of conformal layers onto laser-textured metal surfaces. Surface analyses, carried out by scanning electron microscopy and profilometry, reveal the presence of periodic microchannels decorated with laser-induced periodic surface structures (LIPSS) in the direction parallel to the microchannels. The water contact angle varies widely from about 20° to 100°, depending on the treated material (titanium, nickel, etc.). Nowadays, reducing the wettability transition time from hydrophilicity to hydrophobicity, while also changing environmental conditions, remains a challenge. Therefore, the characteristics of environmental dust and its influence on the properties of the picosecond laser-textured surface (e.g., chemical bonding of samples) have been studied while monitoring ambient conditions.

Schlagwörter

Stichwörter der Autor:innen

air humiditylaser-induced periodic surface structuresmetal surfacessurface texturingsurface wettability

Autor:innen und Institutionen

  • Department of Mathematical and Computational Sciences, Physics Science and Earth Science, University of Messina, Viale F. Stagno d'Alcontres 31, I-98166 Messina, Italy.
  • CNR-Institute for Chemical and Physical Processes (IPCF), Viale F. Stagno d'Alcontres 37, I-98158 Messina, Italy.

ORCID-Profile: Carmelo Corsaro, Mariangela Latino, Francesco Barreca, Angela Maria Mezzasalma, Fortunato Neri, Enza Fazio

Förderung

  • Ministero dell'Istruzione e del Merito
  • European Union (NextGeneration EU), through the MUR-PNRR project SAMOTHRACE

Zitieren

APA

Corsaro, C., Orlando, G., Costa, G., Latino, M., Barreca, F., Mezzasalma, A. M., Neri, F., & Fazio, E. (2024). Wetting Behavior Driven by Surface Morphology Changes Induced by Picosecond Laser Texturing. Materials, 17(8), 1719. https://doi.org/10.3390/ma17081719

Vancouver

Corsaro C, Orlando G, Costa G, Latino M, Barreca F, Mezzasalma AM, et al. Wetting Behavior Driven by Surface Morphology Changes Induced by Picosecond Laser Texturing. Materials. 2024;17(8):1719. doi:10.3390/ma17081719

BibTeX
@article{Corsaro2024,
  author = {Corsaro, Carmelo and Orlando, Gabriele and Costa, Gabriele and Latino, Mariangela and Barreca, Francesco and Mezzasalma, Angela Maria and Neri, Fortunato and Fazio, Enza},
  title = {Wetting Behavior Driven by Surface Morphology Changes Induced by Picosecond Laser Texturing},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {8},
  pages = {1719},
  doi = {10.3390/ma17081719}
}
Kostenlos starten →