EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Femtosecond Laser Texturing of Ti-6Al-4V: From Ablation Behavior to Controlled Bi-Sinusoidal Surface Morphology

Hassan Alzarif, Frédéric Robache, Romain Vayron, Maxence Bigerelle, Alex Montagne

Surfaces · 16.07.2026 · 9 (3) · 64

DOI: 10.3390/surfaces9030064 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surfaces, online erschienen am 16.07.2026. Verfasst von Hassan Alzarif und 4 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: French National Research Agency ANR, INSA Hauts-de-France, Arts Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a systematic methodology for generating bi-sinusoidal surface topographies with controlled and reproducible characteristics on Ti-6Al-4V using a progressive 1D–2D–3D framework. Such deterministic topographies are of interest for dental implants, where surface micro-texture can influence an early biological response and osseointegration. Single-pulse ablation thresholds were first determined to be 0.175 J/cm2 at a 1031 nm wavelength using 306 fs pulses, with no polarization dependence. Studies were then carried out to identify fundamental ablation parameters, optimize scanning conditions for planar texturing, and extend the process to controlled three-dimensional surface architectures. During the 1D stage, increasing the fluence from 0.26 to 6.52 J/cm2 enlarged the crater diameter from approximately 7 to 32 µm and increased the areal roughness Sa from 0.012 to 0.020 µm. With an increasing pulse number, the crater diameter continued to grow up to 25 pulses before stabilizing. Multi-pulse tests below the threshold showed that repeated exposures caused ablation, highlighting incubation and energy accumulation, with an incubation factor of S = 0.84. In the 2D stage, scanned irradiation was used to quantify how fluence and pulse overlap affect the ablated depth and areal roughness, with depth increasing linearly with the number of passes, and roughness strongly governed by overlap and fluence. Finally, 3D texturing combining x–y scanning with a z-axis focal adjustment enabled reproducible bi-sinusoidal topographies.

Förderung

  • French National Research Agency ANR
  • INSA Hauts-de-France
  • Arts Institute
  • CPER RITMEA and ELSAT projects

Zitieren

APA

Alzarif, H., Robache, F., Vayron, R., Bigerelle, M., & Montagne, A. (2026). Femtosecond Laser Texturing of Ti-6Al-4V: From Ablation Behavior to Controlled Bi-Sinusoidal Surface Morphology. Surfaces, 9(3), 64. https://doi.org/10.3390/surfaces9030064

Vancouver

Alzarif H, Robache F, Vayron R, Bigerelle M, Montagne A. Femtosecond Laser Texturing of Ti-6Al-4V: From Ablation Behavior to Controlled Bi-Sinusoidal Surface Morphology. Surfaces. 2026;9(3):64. doi:10.3390/surfaces9030064

BibTeX
@article{Alzarif2026,
  author = {Alzarif, Hassan and Robache, Frédéric and Vayron, Romain and Bigerelle, Maxence and Montagne, Alex},
  title = {Femtosecond Laser Texturing of Ti-6Al-4V: From Ablation Behavior to Controlled Bi-Sinusoidal Surface Morphology},
  journal = {Surfaces},
  year = {2026},
  volume = {9},
  number = {3},
  pages = {64},
  doi = {10.3390/surfaces9030064}
}
Kostenlos starten →