Research on the Low-Temperature Impact Toughness of a New 100-mm Ultra-Thick Offshore Steel Fabricated Using the Narrow-Gap Laser Wire Filling Welding Process
Materials · 16.03.2024 · 17 (6) · 1363
DOI: 10.3390/ma17061363 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 16.03.2024. Verfasst von Zhong-Lin Hou und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Metallurgy, Laser Advanced Manufacturing Technology Center, University of Science and Technology Liaoning, Anshan 114…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Education General Project of Liaoning Province of China, State Key Laboratory of Marine Equipment Made of Metal Material and Application, Liaoning Province Science and Technology Major Special Plan Project.
Abstract (Originalsprache)
Ultra-thick offshore steel, known for its high strength, high toughness, and corrosion resistance, is commonly used in marine platforms and ship components. However, when offshore steel is in service for an extended period under conditions of high pressure, extreme cold, and high-frequency impact loads, the weld joints are prone to fatigue failure or even fractures. Addressing these issues, this study designed a narrow-gap laser wire filling welding process and successfully welded a 100-mm new type of ultra-thick offshore steel. Using finite element simulation, EBSD testing, SEM analysis, and impact experiments, this study investigates the weld’s microstructure, impact toughness, and fracture mechanisms. The research found that at −80 °C, the welded joint exhibited good impact toughness (>80 J), with the impact absorption energy on the surface of the weld being 217.7 J, similar to that of the base material (225.3 J), and the fracture mechanism was primarily a ductile fracture. The impact absorption energy in the core of the weld was 103.7 J, with the fracture mechanism mainly being a brittle fracture. The EBSD results indicated that due to the influence of the welding thermal cycle and the cooling effect of the narrow-gap process, the grains gradually coarsened from the surface of the welded plate to the core of the weld, which was the main reason for the decreased impact toughness at the joint core. This study demonstrates the feasibility of using narrow-gap laser wire filling welding for 100-mm new type ultra-thick offshore steel and provides a new approach for the joining of ultra-thick steel plates.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Metallurgy, Laser Advanced Manufacturing Technology Center, University of Science and Technology Liaoning, Anshan 114051, China.
- State Key Laboratory of Metal Material for Marine Equipment and Application, Anshan 114051, China.
- Quzhou Academy of Metrology and Quality Inspection, Quzhou 324000, China.
- Harbin Welding Institute Limited Company, Harbin 150028, China.
ORCID-Profile: Zhong-Lin Hou
Förderung
- Department of Education General Project of Liaoning Province of China
- State Key Laboratory of Marine Equipment Made of Metal Material and Application
- Liaoning Province Science and Technology Major Special Plan Project
Zitieren
APA
Hou, Z. L., Guo, H. Q., Wang, J. J., Huang, Z. Y., Wang, Z. A., Fang, D. S., & Qiao, J. (2024). Research on the Low-Temperature Impact Toughness of a New 100-mm Ultra-Thick Offshore Steel Fabricated Using the Narrow-Gap Laser Wire Filling Welding Process. Materials, 17(6), 1363. https://doi.org/10.3390/ma17061363
Vancouver
Hou ZL, Guo HQ, Wang JJ, Huang ZY, Wang ZA, Fang DS, et al. Research on the Low-Temperature Impact Toughness of a New 100-mm Ultra-Thick Offshore Steel Fabricated Using the Narrow-Gap Laser Wire Filling Welding Process. Materials. 2024;17(6):1363. doi:10.3390/ma17061363
BibTeX
@article{Hou2024,
author = {Hou, Zhong-Lin and Guo, Hai-Quan and Wang, Jia-Ji and Huang, Zeng-Yang and Wang, Ze-An and Fang, Di-Sheng and Qiao, Jun},
title = {Research on the Low-Temperature Impact Toughness of a New 100-mm Ultra-Thick Offshore Steel Fabricated Using the Narrow-Gap Laser Wire Filling Welding Process},
journal = {Materials},
year = {2024},
volume = {17},
number = {6},
pages = {1363},
doi = {10.3390/ma17061363}
}
EUVIMED