EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Optimization of Composite Laminates: Multi-Objective Genetic Algorithms with Improved Ply-Stacking Sequences

Ramesh Kumpati iD, Wojciech Skarka iD, Michał Skarka iD, Miha Brojan

Materials · 15.02.2024 · 17 (4) · 887

DOI: 10.3390/ma17040887 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.02.2024. Verfasst von Ramesh Kumpati und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Fundamentals of Machinery Design, Silesian University of Technology, 44-100 Gliwice, Poland. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: BKM Grant, Department of Fundamentals of Machinery Design, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study introduces multi-objective genetic algorithms for optimizing the stacking sequence of lightweight composite structures. Notably, significant emphasis is placed on adhering to engineering design guidelines specific to stacking sequence design. These guidelines are effectively integrated into the optimization problem formulation as either constraints or additional objectives. To enhance the initialization process, a novel strategy is proposed based on mechanical considerations. The method is then applied to optimize a composite laminate in terms of weight, inverse reserve factor, and buckling load factor. Three laminates were considered, and the influence of the design and the material composition on their mechanical properties were studied. This research demonstrated that a new stacking sequence [906/454/06] resulted in improved optimum designs compared to the traditional stacking sequence comprising plies at 0°, 45°, and 90° angles. These outcomes can be deemed the optimum stacking sequence, making them valuable for future applications in unmanned aerial vehicle (UAV) structures.

Schlagwörter

Stichwörter der Autor:innen

bucklingcomposite laminatefailure criteriaoptimizationstacking sequence

Autor:innen und Institutionen

  • Department of Fundamentals of Machinery Design, Silesian University of Technology, 44-100 Gliwice, Poland.
  • Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg 1, 2629 HS Delft, The Netherlands.
  • Faculty of Mechanical Engineering, University of Ljubljana, SI-1000 Ljubljana, Slovenia.

ORCID-Profile: Ramesh Kumpati, Wojciech Skarka, Michał Skarka

Förderung

  • BKM Grant
  • Department of Fundamentals of Machinery Design, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

Zitieren

APA

Kumpati, R., Skarka, W., Skarka, M., & Brojan, M. (2024). Enhanced Optimization of Composite Laminates: Multi-Objective Genetic Algorithms with Improved Ply-Stacking Sequences. Materials, 17(4), 887. https://doi.org/10.3390/ma17040887

Vancouver

Kumpati R, Skarka W, Skarka M, Brojan M. Enhanced Optimization of Composite Laminates: Multi-Objective Genetic Algorithms with Improved Ply-Stacking Sequences. Materials. 2024;17(4):887. doi:10.3390/ma17040887

BibTeX
@article{Kumpati2024,
  author = {Kumpati, Ramesh and Skarka, Wojciech and Skarka, Michał and Brojan, Miha},
  title = {Enhanced Optimization of Composite Laminates: Multi-Objective Genetic Algorithms with Improved Ply-Stacking Sequences},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {4},
  pages = {887},
  doi = {10.3390/ma17040887}
}
Kostenlos starten →