EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate

Ibrahim Sari, Mahmoud Ahmadein iD, Sabbah Ataya iD, Lakhdar Hachani, Kader Zaidat, Nashmi Alrasheedi, Menghuai Wu iD, Abdellah Kharicha iD

Materials · 13.02.2024 · 17 (4) · 865

DOI: 10.3390/ma17040865 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.02.2024. Verfasst von Ibrahim Sari und 7 weiteren Autor:innen. Beteiligte Einrichtung: Metallurgy Department, Montanuniversitaet of Leoben, Franz-Josef-Str. 18, A-8700 Leoben, Austria. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Imam Mohammad ibn Saud Islamic University, Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Secondary dendrite arm spacing (SDAS) is one of the most important factors affecting macrosegregation and mechanical properties in solidification processes. Predicting SDAS is one of the major parameters in foundry technology. In order to predict the evolution of microstructures during the solidification process, we proposed a simple model which predicted the secondary dendrite arm spacing based solely on the tip velocity (related to the tip supersaturation) and cooling rate. The model consisted of a growing cylinder inside a liquid cylindrical envelope. Two important hypotheses were made: (1) Initially the cylinder radius was assumed to equal the dendrite tip radius and (2) the cylindrical envelope had a fixed radius in the order of the dendrite tip diffusion length. The numerical model was tested against experiments using various Pb–Sn alloys for a fixed temperature gradient. The results were found to be in excellent agreement with experimental measurements in terms of SDAS and dendrite tip velocity prediction. This simple model is naturally destined to be implemented as a sub-grid model in volume-averaging models to predict the local microstructure, which in turn directly controls the mushy zone permeability and macrosegregation phenomena.

Schlagwörter

Stichwörter der Autor:innen

directional solidificationmicrostructuressecondary dendrite arm spacingsub-grid model

Autor:innen und Institutionen

  • Metallurgy Department, Montanuniversitaet of Leoben, Franz-Josef-Str. 18, A-8700 Leoben, Austria.
  • Department of Production Engineering and Mechanical Design, Tanta University, Tanta 31512, Egypt.
  • Department of Mechanical Engineering, Imam Mohammad Ibn Saud Islamic University, Riyadh 11564, Saudi Arabia.
  • Laboratoire Physique des Matériaux, Université Amar Telidji-Laghouat, Route de Ghardaia, Laghouat BP 37G, Algeria.
  • University Grenoble Alpes, Grenoble-INP, CNRS, SIMaP, F-38000 Grenoble, France.

ORCID-Profile: Mahmoud Ahmadein, Sabbah Ataya, Menghuai Wu, Abdellah Kharicha

Förderung

  • Imam Mohammad ibn Saud Islamic University
  • Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University

Zitieren

APA

Sari, I., Ahmadein, M., Ataya, S., Hachani, L., Zaidat, K., Alrasheedi, N., Wu, M., & Kharicha, A. (2024). Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate. Materials, 17(4), 865. https://doi.org/10.3390/ma17040865

Vancouver

Sari I, Ahmadein M, Ataya S, Hachani L, Zaidat K, Alrasheedi N, et al. Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate. Materials. 2024;17(4):865. doi:10.3390/ma17040865

BibTeX
@article{Sari2024,
  author = {Sari, Ibrahim and Ahmadein, Mahmoud and Ataya, Sabbah and Hachani, Lakhdar and Zaidat, Kader and Alrasheedi, Nashmi and Wu, Menghuai and Kharicha, Abdellah},
  title = {Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {4},
  pages = {865},
  doi = {10.3390/ma17040865}
}
Kostenlos starten →