EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling Microsegregation during Metal Additive Manufacturing: Impact of Dendrite Tip Kinetics and Finite Solute Diffusion

V. S. Hariharan, Baler Nithin, L. Ruban Raj, Surendra Kumar Makineni, B. S. Murty, Gandham Phanikumar

Crystals · 19.05.2023 · 13 (5) · 842

DOI: 10.3390/cryst13050842 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 19.05.2023. Verfasst von V. S. Hariharan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Technology, Government of India.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rapid solidification during metal additive manufacturing (AM) leads to non-equilibrium microsegregation, which can result in the formation of detrimental phases and cracking. Most of the microsegregation models assume a Scheil-type solidification, where the solidification interface is planar and there exists a local equilibrium at the interface along with either zero or infinite solute diffusion in the respective participating phases—solid and liquid. This assumption leads to errors in prediction. One has to account for finite solute diffusion and the curvature at the dendritic tip for more accurate predictions. In this work, we compare different microsegregation models, that do and do not consider finite diffusion and dendrite tip kinetics, against experiments. We also propose a method to couple dendrite tip kinetics with the diffusion module (DICTRA®) implemented in Thermo-Calc®. The models which accounted for both finite diffusion and dendrite tip kinetics matched well with the experimental data.

Förderung

  • Department of Science and Technology, Government of India

Zitieren

APA

Hariharan, V. S., Nithin, B., Raj, L. R., Makineni, S. K., Murty, B. S., & Phanikumar, G. (2023). Modeling Microsegregation during Metal Additive Manufacturing: Impact of Dendrite Tip Kinetics and Finite Solute Diffusion. Crystals, 13(5), 842. https://doi.org/10.3390/cryst13050842

Vancouver

Hariharan VS, Nithin B, Raj LR, Makineni SK, Murty BS, Phanikumar G. Modeling Microsegregation during Metal Additive Manufacturing: Impact of Dendrite Tip Kinetics and Finite Solute Diffusion. Crystals. 2023;13(5):842. doi:10.3390/cryst13050842

BibTeX
@article{Hariharan2023,
  author = {Hariharan, V. S. and Nithin, Baler and Raj, L. Ruban and Makineni, Surendra Kumar and Murty, B. S. and Phanikumar, Gandham},
  title = {Modeling Microsegregation during Metal Additive Manufacturing: Impact of Dendrite Tip Kinetics and Finite Solute Diffusion},
  journal = {Crystals},
  year = {2023},
  volume = {13},
  number = {5},
  pages = {842},
  doi = {10.3390/cryst13050842}
}
Kostenlos starten →