Polishing Mechanism of CMP 4H-SiC Crystal Substrate (0001) Si Surface Based on an Alumina (Al2O3) Abrasive
Materials · 31.01.2024 · 17 (3) · 679
DOI: 10.3390/ma17030679 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.01.2024. Verfasst von Juntao Gong und 3 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Materials for Integrated Circuits, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Scienc…. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Technology of Zhejiang Province and the Bureau of Science and Technology of Haining, Department of Science and Technology of Zhejiang Province, Bureau of Science and Technology of Haining.
Abstract (Originalsprache)
Silicon carbide, a third-generation semiconductor material, is widely used in the creation of high-power devices. In this article, we systematically study the influence of three crucial parameters on the polishing rate of a silicon carbide surface using orthogonal experiments. By optimizing the parameters of chemical mechanical polishing (CMP) through experiments, we determined that the material removal rate (MRR) is 1.2 μm/h and the surface roughness (Ra) is 0.093 nm. Analysis of the relevant polishing mechanism revealed that manganese dioxide formed during the polishing process. Finally, due to the electrostatic effect of the two, MnO2 adsorbed on the Al2O3, which explains the polishing mechanism of Al2O3 in the slurry.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Key Laboratory of Materials for Integrated Circuits, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, 865 Changning Road, Shanghai 200050, China.
- University of Chinese Academy of Sciences, No. 19, Yuquan Road, Shijingshan District, Beijing 100049, China.
- Shanghai Xinanna Electronic Technology Co., Ltd., Shanghai 201506, China.
- Zhejiang Xinchuangna Electronic Technology Co., Ltd., Haining 314406, China.
ORCID-Profile: Weili Liu
Förderung
- Department of Science and Technology of Zhejiang Province and the Bureau of Science and Technology of Haining
- Department of Science and Technology of Zhejiang Province
- Bureau of Science and Technology of Haining
Zitieren
APA
Gong, J., Wang, W., Liu, W., & Song, Z. (2024). Polishing Mechanism of CMP 4H-SiC Crystal Substrate (0001) Si Surface Based on an Alumina (Al2O3) Abrasive. Materials, 17(3), 679. https://doi.org/10.3390/ma17030679
Vancouver
Gong J, Wang W, Liu W, Song Z. Polishing Mechanism of CMP 4H-SiC Crystal Substrate (0001) Si Surface Based on an Alumina (Al2O3) Abrasive. Materials. 2024;17(3):679. doi:10.3390/ma17030679
BibTeX
@article{Gong2024,
author = {Gong, Juntao and Wang, Weilei and Liu, Weili and Song, Zhitang},
title = {Polishing Mechanism of CMP 4H-SiC Crystal Substrate (0001) Si Surface Based on an Alumina (Al2O3) Abrasive},
journal = {Materials},
year = {2024},
volume = {17},
number = {3},
pages = {679},
doi = {10.3390/ma17030679}
}
EUVIMED