Influences of Nonaqueous Slurry Components on Polishing 4H-SiC Substrate with a Fixed Abrasive Pad
Crystals · 26.05.2023 · 13 (6) · 869
DOI: 10.3390/cryst13060869 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 26.05.2023. Verfasst von Jiyuan Zhong und 6 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tao Sun.
Abstract (Originalsprache)
4H-SiC wafers are more likely to sustain a lower material removal rate (MRR) and severe subsurface damage in conventional chemical mechanical polishing (CMP) methods. To overcome the material removal bottleneck imposed by aqueous chemistry, a high-efficiency polishing of 4H-SiC wafers method by applying reactive nonaqueous fluids to self-sharpening fixed abrasive pads has been proposed in our former research works. Furthermore, to improve the material removal rate and reduce the surface roughness Sa value of 4H-SiC substrates of the Si face, the effect of organic acid, H2O2, and Triton X-100 in nonaqueous slurry on 4H-SiC polishing was investigated. The MRR of 12.83 μm/h and the Sa of 1.45 nm can be obtained by the orthogonally optimized slurry consisting of 3 wt% H2O2, 0.5 wt% Triton X-100 at pH = 3. It is also found that the addition of different levels of oxidant H2O2 and surfactant Triton X-100 components not only increased the MRR of the 4H-SiC substrates of the Si face but also achieved a lower Sa value; in that, the polishing efficiency of the Si side of the 4H-SiC wafers and the surface quality of the 4H-SiC wafers could be effectively improved by the optimization of the polishing slurry.
Förderung
- Tao Sun
Zitieren
APA
Zhong, J., Chen, J., Wang, H., Chen, H., Gu, Y., Shen, J., & Sun, T. (2023). Influences of Nonaqueous Slurry Components on Polishing 4H-SiC Substrate with a Fixed Abrasive Pad. Crystals, 13(6), 869. https://doi.org/10.3390/cryst13060869
Vancouver
Zhong J, Chen J, Wang H, Chen H, Gu Y, Shen J, et al. Influences of Nonaqueous Slurry Components on Polishing 4H-SiC Substrate with a Fixed Abrasive Pad. Crystals. 2023;13(6):869. doi:10.3390/cryst13060869
BibTeX
@article{Zhong2023,
author = {Zhong, Jiyuan and Chen, Jiapeng and Wang, Hanqiang and Chen, Haibo and Gu, Yunyun and Shen, Juanfen and Sun, Tao},
title = {Influences of Nonaqueous Slurry Components on Polishing 4H-SiC Substrate with a Fixed Abrasive Pad},
journal = {Crystals},
year = {2023},
volume = {13},
number = {6},
pages = {869},
doi = {10.3390/cryst13060869}
}
EUVIMED