EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving Mechanical Properties of Fe-Mn-Co-Cr High-Entropy Alloy via Annealing after Cold Rolling

Yukun Lv, Pingtao Song, Yuzhe Wang, Xuerou Zhao, Wei Gao, Jie Zhang, Yutian Lei, Jian Chen

Materials · 30.01.2024 · 17 (3) · 676

DOI: 10.3390/ma17030676 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.01.2024. Verfasst von Yukun Lv und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Chemical Engineering, Xi'an Technological University, Xi'an 710021, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, High-Level Talent Special Support Program Science and Technology Innovation Leading Talent Project of Shaanxi Provincial, Special Research Plan of the Department of Education of Shaanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The as-cast (Fe50Mn30Co10Cr10)97C2Mo1 HEA (high entropy alloy) was prepared and cold-rolled at 70%. Subsequently, annealing heat treatment at different temperatures (900 °C, 950 °C, 1000 °C) was carried out. The microstructure evolution and mechanical properties of the HEA were systematically investigated. The results showed that the HEA annealed at 900 °C and 950 °C exhibited uneven grain size and rich σ precipitation phase at grain boundaries. The grains began to grow and complete recrystallization, and no σ phases were observed in HEA annealed at 1000 °C, which resulted in a higher tensile strength of ~885 MPa and elongation of ~68% compared with other annealed HEAs. The higher volume fraction of annealing twins with 60° orientation was produced in HEA annealed at 1000 °C, which enhanced the tensile strength and plasticity via the Twinning-induced plasticity (TWIP) mechanism.

Schlagwörter

Stichwörter der Autor:innen

HEAannealingdeformation twinmicrostructure

Autor:innen und Institutionen

  • School of Materials Science and Chemical Engineering, Xi'an Technological University, Xi'an 710021, China.
  • School of Railway Equipment Manufacturing, Shaanxi Railway Institute, Weinan 714099, China.

Förderung

  • National Key Research and Development Program of China
  • High-Level Talent Special Support Program Science and Technology Innovation Leading Talent Project of Shaanxi Provincial
  • Special Research Plan of the Department of Education of Shaanxi Province
  • the Research Plan Projects in Weinan city
  • Aeronautical Science Foundation of China

Zitieren

APA

Lv, Y., Song, P., Wang, Y., Zhao, X., Gao, W., Zhang, J., Lei, Y., & Chen, J. (2024). Improving Mechanical Properties of Fe-Mn-Co-Cr High-Entropy Alloy via Annealing after Cold Rolling. Materials, 17(3), 676. https://doi.org/10.3390/ma17030676

Vancouver

Lv Y, Song P, Wang Y, Zhao X, Gao W, Zhang J, et al. Improving Mechanical Properties of Fe-Mn-Co-Cr High-Entropy Alloy via Annealing after Cold Rolling. Materials. 2024;17(3):676. doi:10.3390/ma17030676

BibTeX
@article{Lv2024,
  author = {Lv, Yukun and Song, Pingtao and Wang, Yuzhe and Zhao, Xuerou and Gao, Wei and Zhang, Jie and Lei, Yutian and Chen, Jian},
  title = {Improving Mechanical Properties of Fe-Mn-Co-Cr High-Entropy Alloy via Annealing after Cold Rolling},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {3},
  pages = {676},
  doi = {10.3390/ma17030676}
}
Kostenlos starten →