Microstructure and Mechanical Properties of FeCoNiCuB 0.1 High‐Entropy Alloy after Casting, Cold‐Rolling Deformation, and Annealing
physica status solidi (a) · 2025-09 · 222 (18)
DOI: 10.1002/pssa.202500358 ↗Kurz gefasst
Fachartikel in der Zeitschrift physica status solidi (a), online erschienen am 11.08.2025. Verfasst von MingLong Gong und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben.
Abstract (Originalsprache)
This study examines microstructural evolution and mechanical properties of FeCoNiCuB 0.1 high‐entropy alloy annealed at 500–1000 °C. The as‐cast alloy exhibits a dendritic FCC matrix with Cu segregation forming interdendritic precipitates and B‐rich bands at grain boundaries. Cold‐rolling produces broken grains, microbands, and deformation twins, dominated by dislocation slip; recrystallization begins above 800 °C. A heterogeneous structure forms at 900 °C, while 1000 °C yields complete recrystallization with annealing twins (grain sizes: 3.9 μm at 900 °C, 8.1 μm at 1000 °C). Mechanically, annealing at 1000 °C increases ultimate tensile strength (560 to 607 MPa) and elongation (15% to 25%). Strain hardening is multistage after 900 °C and 1000 °C annealing, contrasting the monotonically decreasing rate in the as‐cast state. Fracture morphology transitions from mixed‐mode (as‐cast/cold‐rolled) to flatter surfaces with shallow dimples at 900 °C, and finally to fully ductile fracture with deep dimples and reduced cleavage at 1000 °C.
Zitieren
APA
Gong, M., Wang, K., Liu, E., Guo, W., Bao, F., Liu, F., Bai, J., & Gao, Q. (2025). Microstructure and Mechanical Properties of FeCoNiCuB 0.1 High‐Entropy Alloy after Casting, Cold‐Rolling Deformation, and Annealing. physica status solidi (a), 222(18). https://doi.org/10.1002/pssa.202500358
Vancouver
Gong M, Wang K, Liu E, Guo W, Bao F, Liu F, et al. Microstructure and Mechanical Properties of FeCoNiCuB 0.1 High‐Entropy Alloy after Casting, Cold‐Rolling Deformation, and Annealing. physica status solidi (a). 2025;222(18). doi:10.1002/pssa.202500358
BibTeX
@article{Gong2025,
author = {Gong, MingLong and Wang, KeYi and Liu, EnRui and Guo, Wen and Bao, FangXuan and Liu, FengFang and Bai, Jing and Gao, QiuZhi},
title = {Microstructure and Mechanical Properties of FeCoNiCuB 0.1 High‐Entropy Alloy after Casting, Cold‐Rolling Deformation, and Annealing},
journal = {physica status solidi (a)},
year = {2025},
volume = {222},
number = {18},
doi = {10.1002/pssa.202500358}
}
EUVIMED