EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Fiber Content on Mechanical Properties of Fiber-Reinforced CGF All-Solid-Waste Binder-Solidified Soil

Xinyi Qiu, Junjie Yang, Yalei Wu iD, Lijun Yan, Qiang Liu

Materials · 12.01.2024 · 17 (2) · 388

DOI: 10.3390/ma17020388 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.01.2024. Verfasst von Xinyi Qiu und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Environmental Science and Engineering, Ocean University of China, Qingdao 266100, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to realize the resource utilization of solid waste and improve the tensile strength and toughness of soil, CCR-GGBS-FA all-solid-waste binder (CGF) composed of general industrial solid waste calcium carbide residue (CCR), ground granulated blast furnace slag (GGBS) and fly ash (FA) was used instead of cement and combined with polypropylene fiber to strengthen the silty soil taken from Dongying City, China. An unconfined compressive strength test (UCS test) and a uniaxial tensile test (UT test) were carried out on 10 groups of samples with five different fiber contents to uncover the effect of fiber content on tensile and compressive properties, and the reinforcement mechanism was studied using a scanning electron microscopy (SEM) test. The test results show that the unconfined compressive strength, the uniaxial tensile strength, the deformation modulus, the tensile modulus, the fracture energy and the residual strength of fiber-reinforced CGF-solidified soil are significantly improved compared with nonfiber-solidified soil. The compressive strength and the tensile strength of polypropylene-fiber-reinforced CGF-solidified soil reach the maximum value when the fiber content is 0.25%, as the unconfined compressive strength and the tensile strength are 3985.7 kPa and 905.9 kPa, respectively, which are 116.60% and 186.16% higher than those of nonfiber-solidified soil, respectively. The macro–micro tests identify that the hydration products generated by CGF improve the compactness through gelling and filling in solidified soil, and the fiber enhances the resistance to deformation by bridging and forming a three-dimensional network structure. The addition of fiber effectively improves the toughness and stiffness of solidified soil and makes the failure mode of CGF-solidified soil transition from typical brittle failure to plastic failure. The research results can provide a theoretical basis for the application of fiber-reinforced CGF-solidified soil in practical engineering.

Schlagwörter

Stichwörter der Autor:innen

alkali-activated binderfiber contentfracture energyreinforcement mechanismtensile strengthtensile–compression ratio

Autor:innen und Institutionen

  • College of Environmental Science and Engineering, Ocean University of China, Qingdao 266100, China.
  • The Key Laboratory of Marine Environment and Ecology of the Ministry of Education, Ocean University of China, Qingdao 266100, China.

ORCID-Profile: Yalei Wu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Qiu, X., Yang, J., Wu, Y., Yan, L., & Liu, Q. (2024). Effect of Fiber Content on Mechanical Properties of Fiber-Reinforced CGF All-Solid-Waste Binder-Solidified Soil. Materials, 17(2), 388. https://doi.org/10.3390/ma17020388

Vancouver

Qiu X, Yang J, Wu Y, Yan L, Liu Q. Effect of Fiber Content on Mechanical Properties of Fiber-Reinforced CGF All-Solid-Waste Binder-Solidified Soil. Materials. 2024;17(2):388. doi:10.3390/ma17020388

BibTeX
@article{Qiu2024,
  author = {Qiu, Xinyi and Yang, Junjie and Wu, Yalei and Yan, Lijun and Liu, Qiang},
  title = {Effect of Fiber Content on Mechanical Properties of Fiber-Reinforced CGF All-Solid-Waste Binder-Solidified Soil},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {2},
  pages = {388},
  doi = {10.3390/ma17020388}
}
Kostenlos starten →