EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Geopolymer Concrete Physical and Mechanical Properties on a Combined Binder Reinforced with Dispersed Polypropylene Fiber

Sergei A Stel'makh iD, Alexey N Beskopylny iD, Evgenii M Shcherban iD, Diana Elshaeva iD, Andrei Chernilnik iD, Denis Kuimov, Alexandr Evtushenko, Samson Oganesyan

Polymers · 19.06.2025 · 17 (12) · 1710

DOI: 10.3390/polym17121710 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.06.2025. Verfasst von Sergei A Stel'makh und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Unique Buildings and Constructions Engineering, Don State Technical University, 344003 Rostov-on-Don, Russia. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 95 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Geopolymer concrete is a promising construction material that acts as an alternative to cement concrete. Unlike traditional cement concrete, geopolymers are environmentally friendly materials, the production of which does not involve significant carbon dioxide emissions. However, the structure formation and properties of geopolymers significantly depend on raw materials and are insufficiently studied. The aim of the study is to select the optimal combination of ground granulated blast furnace slag (GGBS) and fly ash (FA) as a binder and the optimal content of polypropylene fiber to create a sustainable, environmentally friendly and effective geopolymer concrete. To study various compositions of geopolymer binders selected by combining GGBS and FA, experimental geopolymer concrete mixtures and samples from them were manufactured. The density and slump of fresh concrete and the density and compressive strength of hardened composites were studied as mechanical characteristics. The microstructure of the geopolymer matrix was analyzed using optical and scanning electron microscopes. The most rational combination of GGBS 80% and FA 20% was determined, which allows obtaining a composite with the highest compressive strength of up to 31.5 MPa. A dispersion reinforcement study revealed that 0.8% polypropylene fiber (PF) is optimal. This allowed us to increase the compressive strength by 7.3% and the flexural strength by 48.7%. The geopolymer fiber concrete obtained in this study is a sustainable and environmentally friendly alternative composite material and has sufficient performance properties for its use as an alternative to cement concrete.

Schlagwörter

Stichwörter der Autor:innen

aluminosilicate componentcompressive strengthdispersed reinforcementgeopolymer concretepolypropylene fiber (PF)

Autor:innen und Institutionen

  • Department of Unique Buildings and Constructions Engineering, Don State Technical University, 344003 Rostov-on-Don, Russia.
  • Department of Transport Systems, Faculty of Roads and Transport Systems, Don State Technical University, 344003 Rostov-on-Don, Russia.
  • Department of Engineering Geometry and Computer Graphics, Don State Technical University, 344003 Rostov-on-Don, Russia.
  • Department of Digital Technologies and Platforms in Electric Power Industry, Faculty of Energy and Oil and Gas Industry, Don State Technical University, 344003 Rostov-on-Don, Russia.

ORCID-Profile: Sergei A Stel'makh, Alexey N Beskopylny, Evgenii M Shcherban, Diana Elshaeva, Andrei Chernilnik

Förderung

  • Russian Science Foundation

Zitieren

APA

Stel'makh, S. A., Beskopylny, A. N., Shcherban, E. M., Elshaeva, D., Chernilnik, A., Kuimov, D., Evtushenko, A., & Oganesyan, S. (2025). Geopolymer Concrete Physical and Mechanical Properties on a Combined Binder Reinforced with Dispersed Polypropylene Fiber. Polymers, 17(12), 1710. https://doi.org/10.3390/polym17121710

Vancouver

Stel'makh SA, Beskopylny AN, Shcherban EM, Elshaeva D, Chernilnik A, Kuimov D, et al. Geopolymer Concrete Physical and Mechanical Properties on a Combined Binder Reinforced with Dispersed Polypropylene Fiber. Polymers. 2025;17(12):1710. doi:10.3390/polym17121710

BibTeX
@article{Stelmakh2025,
  author = {Stel'makh, Sergei A and Beskopylny, Alexey N and Shcherban, Evgenii M and Elshaeva, Diana and Chernilnik, Andrei and Kuimov, Denis and Evtushenko, Alexandr and Oganesyan, Samson},
  title = {Geopolymer Concrete Physical and Mechanical Properties on a Combined Binder Reinforced with Dispersed Polypropylene Fiber},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {12},
  pages = {1710},
  doi = {10.3390/polym17121710}
}
Kostenlos starten →