EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structure Analysis and Its Correlation with Mechanical Properties of Microcellular Polyamide Composites Reinforced with Glass Fibers

Piotr Szewczykowski iD, Dariusz Sykutera iD, Piotr Czyżewski iD, Mieczysław Cieszko iD, Zbigniew Szczepański, Bartosz Nowinka iD

Materials · 04.12.2023 · 16 (23) · 7501

DOI: 10.3390/ma16237501 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.12.2023. Verfasst von Piotr Szewczykowski und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Manufacturing Techniques, Faculty of Mechanical Engineering, Bydgoszcz University of Science and Technology, Kaliskiego 7, 85-796 Bydgo…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Ministry of Education and Science, Ministry of Education and Science.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thin-walled and thick-walled microcellular moldings were obtained by MuCell® technology with nitrogen as a supercritical fluid. 2 mm thick polyamide 6 (PA6) with 30% wt. glass fiber (GF) samples were cut from automotive industrial elements, while 4 mm, 6 mm, and 8.4 mm thick moldings of PA6.6 with 30% wt. GF were molded into a dumbbell shape. The internal structure was investigated by scanning electron microscopy (SEM) and X-ray computed microtomography (micro-CT) and compared by numerical simulations for microcellular moldings using Moldex3D® 2022 software. Young’s modulus, and tensile and impact strength were investigated. Weak mechanical properties of 2 mm thick samples and excellent results for thick-walled moldings were explained. SEM pictures, micro-CT, and simulation graphs revealed the tendency to decrease the cell size diameter together with increasing sample thickness from 2 mm up to 8.4 mm.

Schlagwörter

Stichwörter der Autor:innen

X-ray computed microtomographymechanical propertiesnumerical simulationspolymer–matrix compositesporous materials

Autor:innen und Institutionen

  • Department of Manufacturing Techniques, Faculty of Mechanical Engineering, Bydgoszcz University of Science and Technology, Kaliskiego 7, 85-796 Bydgoszcz, Poland.
  • Department of Mechanics of Porous Media, Faculty of Mechatronics, Kazimierz Wielki University, Chodkiewicza 30, 85-064 Bydgoszcz, Poland.

ORCID-Profile: Piotr Szewczykowski, Dariusz Sykutera, Piotr Czyżewski, Mieczysław Cieszko, Bartosz Nowinka

Förderung

  • The Ministry of Education and Science
  • Ministry of Education and Science

Zitieren

APA

Szewczykowski, P., Sykutera, D., Czyżewski, P., Cieszko, M., Szczepański, Z., & Nowinka, B. (2023). Structure Analysis and Its Correlation with Mechanical Properties of Microcellular Polyamide Composites Reinforced with Glass Fibers. Materials, 16(23), 7501. https://doi.org/10.3390/ma16237501

Vancouver

Szewczykowski P, Sykutera D, Czyżewski P, Cieszko M, Szczepański Z, Nowinka B. Structure Analysis and Its Correlation with Mechanical Properties of Microcellular Polyamide Composites Reinforced with Glass Fibers. Materials. 2023;16(23):7501. doi:10.3390/ma16237501

BibTeX
@article{Szewczykowski2023,
  author = {Szewczykowski, Piotr and Sykutera, Dariusz and Czyżewski, Piotr and Cieszko, Mieczysław and Szczepański, Zbigniew and Nowinka, Bartosz},
  title = {Structure Analysis and Its Correlation with Mechanical Properties of Microcellular Polyamide Composites Reinforced with Glass Fibers},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {23},
  pages = {7501},
  doi = {10.3390/ma16237501}
}
Kostenlos starten →