Effects of mechanical recycling on the properties of glass fiber–reinforced polyamide 66 composites in automotive components
e-Polymers · 20.10.2023 · 23 (1)
DOI: 10.1515/epoly-2023-0129 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Polymers, online erschienen am 20.10.2023. Verfasst von Cansu Gültürk und 1 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, we aimed to reveal the effective reusability of waste generated during the injection molding process of polyamide 66 (PA66) reinforced with 30 wt% of short glass fiber (PA66-GF30) widely used in the automotive industry. PA66-GF30 was subjected to the three mechanical recycling cycles, including regranulation and reinjection molding steps, and the recycled materials obtained in each of these cycles were included at the ratios of 15, 20, 25, and 30 wt% to the virgin composite. Thermogravimetric analysis and differential scanning calorimeter analyses showed that the number of recycling cycles and recycled material content in the composite had no significant change in the thermal stability and crystallinity degree of the PA66-GF30. The average fiber length determined by optical microscope analysis shifted to lower values from 300–350 to 150–250 μm by increasing the number of recycling cycles and the recycled material content. The fact that the recycled material content in the composite exceeds 25 wt% and the recycling cycle is applied three times played a key role in changing the mechanical and melt flow behaviors of the composite. Tensile strength, elastic modulus, and impact energy slightly decreased while the elongation at break and melt flow index increased.
Zitieren
APA
Gültürk, C., & Berber, H. (2023). Effects of mechanical recycling on the properties of glass fiber–reinforced polyamide 66 composites in automotive components. e-Polymers, 23(1). https://doi.org/10.1515/epoly-2023-0129
Vancouver
Gültürk C, Berber H. Effects of mechanical recycling on the properties of glass fiber–reinforced polyamide 66 composites in automotive components. e-Polymers. 2023;23(1). doi:10.1515/epoly-2023-0129
BibTeX
@article{Gltrk2023,
author = {Gültürk, Cansu and Berber, Hale},
title = {Effects of mechanical recycling on the properties of glass fiber–reinforced polyamide 66 composites in automotive components},
journal = {e-Polymers},
year = {2023},
volume = {23},
number = {1},
doi = {10.1515/epoly-2023-0129}
}
EUVIMED