EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Deformation Behavior and Processing Maps of 7075 Aluminum Alloy under Large-Strain Thermal Compression

Erli Xia iD, Tuo Ye, Sawei Qiu, Limei Liu, Fang Luo, Huanyu Yue, Yuanzhi Wu

Materials · 29.11.2023 · 16 (23) · 7432

DOI: 10.3390/ma16237432 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.11.2023. Verfasst von Erli Xia und 6 weiteren Autor:innen. Beteiligte Einrichtung: Research Institute of Automobile Parts Technology, Hunan Institute of Technology, Hengyang 421002, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Scientific Research Fund of Hunan Provincial Education Department of China, the Scientific Research Project of Hunan Institute of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The investigation of thermal deformation behavior plays a significant role in guaranteeing the overall performance of alloy materials. In this manuscript, a series of isothermal compression tests at different temperatures (300, 350, 400, and 450 °C) and strain rates (0.001, 0.01, 0.1, and 1 s−1) were conducted to study the thermal deformation behavior of 7075 aluminum alloy. Subsequently, processing maps at a strain from 0.4 to 1.39 were established according to the stress–strain data obtained from various deformation parameters. The microstructural evolution of the target alloy was observed with an optical microscope and transmission electron microscope. The results reveal the unstable regions are located at (360–450 °C, 0.04–1 s−1) and (300–315 °C, 0.01–0.22 s−1). Precipitation particles, pinned dislocations, and highly dislocated areas can be observed in the microstructure of the alloy in the unstable regions. This is a potential crack and defect formation point. The identified optimum processing parameters are located at (375–450 °C, 0.001–0.03 s−1), with a maximum dissipation efficiency of 0.6.

Schlagwörter

Stichwörter der Autor:innen

7075 aluminum alloylarge-strain thermal deformationmicrostructure observationprocessing map

Autor:innen und Institutionen

  • Research Institute of Automobile Parts Technology, Hunan Institute of Technology, Hengyang 421002, China.
  • School of Intelligent Manufacturing and Mechanical Engineering, Hunan Institute of Technology, Hengyang 421002, China.
  • School of Material Science and Engineering, Hunan Institute of Technology, Hengyang 421002, China.

ORCID-Profile: Erli Xia

Förderung

  • National Natural Science Foundation of China
  • Scientific Research Fund of Hunan Provincial Education Department of China
  • the Scientific Research Project of Hunan Institute of Technology
  • Scientific Research Project of Hunan Institute of Technology
  • Aid Program for Science and Technology Innovative Research Team in Higher Educational Institutions of Hunan Province

Zitieren

APA

Xia, E., Ye, T., Qiu, S., Liu, L., Luo, F., Yue, H., & Wu, Y. (2023). Deformation Behavior and Processing Maps of 7075 Aluminum Alloy under Large-Strain Thermal Compression. Materials, 16(23), 7432. https://doi.org/10.3390/ma16237432

Vancouver

Xia E, Ye T, Qiu S, Liu L, Luo F, Yue H, et al. Deformation Behavior and Processing Maps of 7075 Aluminum Alloy under Large-Strain Thermal Compression. Materials. 2023;16(23):7432. doi:10.3390/ma16237432

BibTeX
@article{Xia2023,
  author = {Xia, Erli and Ye, Tuo and Qiu, Sawei and Liu, Limei and Luo, Fang and Yue, Huanyu and Wu, Yuanzhi},
  title = {Deformation Behavior and Processing Maps of 7075 Aluminum Alloy under Large-Strain Thermal Compression},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {23},
  pages = {7432},
  doi = {10.3390/ma16237432}
}
Kostenlos starten →