EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of Wear Resistance of Overlay Welded Layers and Thermal Sprayed Coatings in Real Conditions

Michał Szymura, Grzegorz Gąsiorek, Artur Czupryński iD, Waldemar Kwaśny iD, Viktor Kvasnytskyi iD

Materials · 17.11.2023 · 16 (22) · 7215

DOI: 10.3390/ma16227215 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.11.2023. Verfasst von Michał Szymura und 4 weiteren Autor:innen. Beteiligte Einrichtung: FPM S.A., Wyzwolenia Street 12C, 43-190 Mikołów, Poland. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tribological tests in real conditions enable obtaining full data on the life of interacting machine parts. This article presents the results of operational tests on the elements of the support ring guidance system in a vertical ball-race mill. The guide and active armour operate under abrasive wear conditions with moderate-impact loads. The wear resistance of elements with overlay welding layers deposited with flux cored wire with a structure of high-alloy chrome cast iron and with a coating flame-sprayed with nickel-based powder was compared. The wear intensity of the overlay weld deposits was much lower than that of the sprayed coatings. The scope of this study also included the analysis of the chemical and phase composition, macro- and microscopic metallographic examinations, and the measurement of the hardness of the deposited layers and coatings.

Schlagwörter

Stichwörter der Autor:innen

chrome cast ironflux cored arc surfacingnickel alloyoperational teststhermal flame sprayingvertical ball-race millwear

Autor:innen und Institutionen

  • FPM S.A., Wyzwolenia Street 12C, 43-190 Mikołów, Poland.
  • Department of Welding, Silesian University of Technology, Konarskiego Street 18A, 44-100 Gliwice, Poland.
  • Igor Sikorsky Kyiv Polytechnic Institute, 37, Peremohy Ave., 03056 Kyiv, Ukraine.

ORCID-Profile: Artur Czupryński, Waldemar Kwaśny, Viktor Kvasnytskyi

Zitieren

APA

Szymura, M., Gąsiorek, G., Czupryński, A., Kwaśny, W., & Kvasnytskyi, V. (2023). Comparison of Wear Resistance of Overlay Welded Layers and Thermal Sprayed Coatings in Real Conditions. Materials, 16(22), 7215. https://doi.org/10.3390/ma16227215

Vancouver

Szymura M, Gąsiorek G, Czupryński A, Kwaśny W, Kvasnytskyi V. Comparison of Wear Resistance of Overlay Welded Layers and Thermal Sprayed Coatings in Real Conditions. Materials. 2023;16(22):7215. doi:10.3390/ma16227215

BibTeX
@article{Szymura2023,
  author = {Szymura, Michał and Gąsiorek, Grzegorz and Czupryński, Artur and Kwaśny, Waldemar and Kvasnytskyi, Viktor},
  title = {Comparison of Wear Resistance of Overlay Welded Layers and Thermal Sprayed Coatings in Real Conditions},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {22},
  pages = {7215},
  doi = {10.3390/ma16227215}
}
Kostenlos starten →