Microstructure and Wear Resistance of Plasma-Sprayed Al2O3-TiO2-CeO2/CNT Composite Coatings
Coatings · 27.06.2026 · 16 (7) · 766
DOI: 10.3390/coatings16070766 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 27.06.2026. Verfasst von Zhifu Xu und 7 weiteren Autor:innen. Die Arbeit nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province, College Students’ Innovation and Entrepreneurship Training Program.
Abstract (Originalsprache)
To improve the wear resistance of 45 steel, nano-agglomerated Al2O3-TiO2-CeO2/carbon nanotubes (CNT) composite powders were prepared by spray drying and ball milling, followed by plasma spraying to fabricate coatings. The effect of CNT content on microstructure and wear resistance was investigated. The powders showed uniform size and high sphericity. Coatings mainly consisted of α-Al2O3, γ-Al2O3, and TiO2. CNT addition refined grain size to 18.3 ± 1.1 nm. The high thermal conductivity of CNT reduced unmelted particles, improving coating density and element uniformity. Average coating thickness was 200 μm. When the CNT content reached 3 wt.%, the coating porosity decreased to 5.01 ± 0.72%. TEM analysis indicated that CeO2 was mainly located at the grain boundaries. Moreover, the interfaces between CNT (002) and CeO2 (220) appeared clean and well-bonded. As CNT content increased, microhardness and wear resistance first increased then decreased. At 3 wt.% CNT, the volumetric wear rate was 0.87 ± 0.15 × 10−5 mm3·N−1·m−1, representing an 8.46-times improvement in wear resistance compared to the substrate. The presence of CeO2 enhanced the surface activity of CNT, facilitating the formation of lubricating films during friction and contributing to the superior wear resistance of the composite coating.
Förderung
- Natural Science Foundation of Shandong Province
- College Students’ Innovation and Entrepreneurship Training Program
Zitieren
APA
Xu, Z., Meng, J., Liu, J., Cong, Y., Li, Q., Jiang, B., Ding, H., & Liu, Q. (2026). Microstructure and Wear Resistance of Plasma-Sprayed Al2O3-TiO2-CeO2/CNT Composite Coatings. Coatings, 16(7), 766. https://doi.org/10.3390/coatings16070766
Vancouver
Xu Z, Meng J, Liu J, Cong Y, Li Q, Jiang B, et al. Microstructure and Wear Resistance of Plasma-Sprayed Al2O3-TiO2-CeO2/CNT Composite Coatings. Coatings. 2026;16(7):766. doi:10.3390/coatings16070766
BibTeX
@article{Xu2026,
author = {Xu, Zhifu and Meng, Junsheng and Liu, Jiaxing and Cong, Yuzhen and Li, Qindong and Jiang, Bei and Ding, Hao and Liu, Qinrui},
title = {Microstructure and Wear Resistance of Plasma-Sprayed Al2O3-TiO2-CeO2/CNT Composite Coatings},
journal = {Coatings},
year = {2026},
volume = {16},
number = {7},
pages = {766},
doi = {10.3390/coatings16070766}
}
EUVIMED