EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Core Density on the Three-Point Bending Performance of Aluminum Foam Sandwich Panels

Peng Huang iD, Qiang Gao, Xixi Su, Zhanhao Feng, Xi Sun iD, Guoyin Zu

Materials · 09.11.2023 · 16 (22) · 7091

DOI: 10.3390/ma16227091 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.11.2023. Verfasst von Peng Huang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Liao Ning Revitalization Talents Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Using the powder-metallurgy rolling method, aluminum foam sandwich (AFS) panels with a metallurgical bond between the foam core and the panel can be produced. In this study, by manipulating the foaming temperature and duration, AFS panels were fabricated with varying core densities and thicknesses, all maintaining a panel thickness close to 1 mm. Through the three-point bending test, this research deeply delved into how core density influences the mechanical behaviors of these AFS panels. It became evident that a rise in core density positively affects the bending strength and failure load of the panels but inversely impacts their total energy absorption efficiency. Differing core densities brought about distinct failure patterns: low-density samples primarily showed panel indentation and core shear failures, whereas those of high density demonstrated panel yield and fractures. Furthermore, the research offers predictions on the initial failure loads for different failure modes and introduces a comprehensively designed failure diagram, laying a foundational theory for the production of AFS panels.

Schlagwörter

Stichwörter der Autor:innen

aluminum foamenergy absorptionpowder metallurgythree-point bending test

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China.

ORCID-Profile: Peng Huang, Xi Sun

Förderung

  • National Natural Science Foundation of China
  • Liao Ning Revitalization Talents Program

Zitieren

APA

Huang, P., Gao, Q., Su, X., Feng, Z., Sun, X., & Zu, G. (2023). Effect of Core Density on the Three-Point Bending Performance of Aluminum Foam Sandwich Panels. Materials, 16(22), 7091. https://doi.org/10.3390/ma16227091

Vancouver

Huang P, Gao Q, Su X, Feng Z, Sun X, Zu G. Effect of Core Density on the Three-Point Bending Performance of Aluminum Foam Sandwich Panels. Materials. 2023;16(22):7091. doi:10.3390/ma16227091

BibTeX
@article{Huang2023,
  author = {Huang, Peng and Gao, Qiang and Su, Xixi and Feng, Zhanhao and Sun, Xi and Zu, Guoyin},
  title = {Effect of Core Density on the Three-Point Bending Performance of Aluminum Foam Sandwich Panels},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {22},
  pages = {7091},
  doi = {10.3390/ma16227091}
}
Kostenlos starten →