EUVIMEDEUVIMED entdecken
Crossref

Fabrication and Three‐Point Bending Behavior of Aluminum Foam Sandwich via Controlled Atmosphere Brazing

Xinyuan Wang, Zhuokun Cao, Xuanhao Liu, Hongjun Wang, Shuang Shi

Advanced Engineering Materials · 2025-05 · 27 (10)

DOI: 10.1002/adem.202500468 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 06.04.2025. Verfasst von Xinyuan Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 57 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Herein, aluminum foam sandwiches (AFS) with metallurgical bonding interfaces are fabricated by controlled atmosphere brazing. The interfacial characterization is observed by scanning electron microscopy, and effect of core densities (0.37, 0.49, and 0.58 g cm −3 ) on mechanical properties is analyzed. Sound brazed joints are observed, with no clear boundaries between the components. The brazing filler metal partially wraps around the cell walls of the aluminum foam core, thereby increasing the contact area between cell walls and face‐sheets, and making the transition relatively smooth. Micro‐CT is used to investigate the deformation mechanism of AFS during quasistatic three‐point bending tests. The initial failure mode of all AFS panels is asymmetric core shear failure on one side of the AFS, with no interface debonding. The flexural load–displacement curves of three‐point bending tests exhibit four stages: 1) nearly linear elastic deformation stage; 2) initial failure stage; 3) plateau stage; and 4) failure stage. The specific flexural strength and specific energy absorption of AFS are found to increase with the core density.

Zitieren

APA

Wang, X., Cao, Z., Liu, X., Wang, H., & Shi, S. (2025). Fabrication and Three‐Point Bending Behavior of Aluminum Foam Sandwich via Controlled Atmosphere Brazing. Advanced Engineering Materials, 27(10). https://doi.org/10.1002/adem.202500468

Vancouver

Wang X, Cao Z, Liu X, Wang H, Shi S. Fabrication and Three‐Point Bending Behavior of Aluminum Foam Sandwich via Controlled Atmosphere Brazing. Advanced Engineering Materials. 2025;27(10). doi:10.1002/adem.202500468

BibTeX
@article{Wang2025,
  author = {Wang, Xinyuan and Cao, Zhuokun and Liu, Xuanhao and Wang, Hongjun and Shi, Shuang},
  title = {Fabrication and Three‐Point Bending Behavior of Aluminum Foam Sandwich via Controlled Atmosphere Brazing},
  journal = {Advanced Engineering Materials},
  year = {2025},
  volume = {27},
  number = {10},
  doi = {10.1002/adem.202500468}
}
Kostenlos starten →