Effect of Bi Content on the Microstructure, Mechanical and Tribological Properties of Cu-Sn Alloy
Materials · 11.10.2023 · 16 (20) · 6658
DOI: 10.3390/ma16206658 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 11.10.2023. Verfasst von Zhenhua Shi und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, North University of China, Taiyuan 030051, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Program of Shanxi Province, Opening Project of Shanxi Key Laboratory of Controlled Metal Solidification and Precision Manufacturing, Opening Project of Shanxi Key Laboratory of Controlled Metal Solidification and Precision Manufacturing, North University of China.
Abstract (Originalsprache)
To reduce the use of the toxic Pb element in the Cu-Sn alloy with high friction performance, Cu-xBi-10Sn alloys with different Bi contents were prepared by gravity casting, and the effect of Bi content on the microstructure, mechanical properties and wear property of Cu-Sn alloys were studied. The results showed that the Bi element was distributed in bands or long strips on the dendritic arms and did not form compounds with other elements. With the increase in Bi content, the hardness and tensile strength of Cu-xBi-10Sn alloys present a trend of increasing first and then decreasing. When the Bi content was 7 wt.%, the maximum hardness value was obtained, and the ultimate tensile strength was close to that of Cu-10Pb-10Sn alloy. Compared with Cu-10Pb-10Sn alloy, Cu-7Bi-10Sn alloy also possessed better friction reduction and wear resistance under the oil lubrication condition.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, North University of China, Taiyuan 030051, China.
- Department of Mechanical Engineering, Taiyuan Institute of Technology, Taiyuan 030008, China.
Förderung
- Fundamental Research Program of Shanxi Province
- Opening Project of Shanxi Key Laboratory of Controlled Metal Solidification and Precision Manufacturing
- Opening Project of Shanxi Key Laboratory of Controlled Metal Solidification and Precision Manufacturing, North University of China
Zitieren
APA
Shi, Z., Xu, H., Zhang, G., Liu, Y., & Ren, X. (2023). Effect of Bi Content on the Microstructure, Mechanical and Tribological Properties of Cu-Sn Alloy. Materials, 16(20), 6658. https://doi.org/10.3390/ma16206658
Vancouver
Shi Z, Xu H, Zhang G, Liu Y, Ren X. Effect of Bi Content on the Microstructure, Mechanical and Tribological Properties of Cu-Sn Alloy. Materials. 2023;16(20):6658. doi:10.3390/ma16206658
BibTeX
@article{Shi2023,
author = {Shi, Zhenhua and Xu, Hong and Zhang, Guowei and Liu, Yijun and Ren, Xiaoyan},
title = {Effect of Bi Content on the Microstructure, Mechanical and Tribological Properties of Cu-Sn Alloy},
journal = {Materials},
year = {2023},
volume = {16},
number = {20},
pages = {6658},
doi = {10.3390/ma16206658}
}
EUVIMED