Effect of Annealing Time on Microstructure Evolution and Mechanical Properties of Hot-Rolled Cu–Zn–Sn Alloy
Metals · 09.11.2026 · 16 (11) · 1227
DOI: 10.3390/met16111227 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 09.11.2026. Verfasst von Longfei Zhai und 7 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanghai Municipal Natural Science Foundation, Science and Technology Commission of Shanghai Municipality, Natural Science Foundation of Shanghai.
Abstract (Originalsprache)
The effect of post-rolling annealing time on the microstructural evolution and room-temperature mechanical properties of a hot-rolled Cu–Zn–Sn alloy was systematically investigated. The alloy was isothermally annealed at 500 °C for 4, 5, and 6 h. Results reveal that annealing time non-monotonically governs the recrystallization of the α and β phases and the final content of the Sn-rich intergranular phase, coupled with the α/β phase transformation and Sn partitioning. The as-hot-rolled microstructure comprises a dual α + β structure without the Sn-rich intergranular phase. After 4 h, the α phase recrystallizes completely, and the β phase fraction decreases, leading to Sn rejection and Sn-rich intergranular phase formation after furnace cooling; hardness and strength are minimum, while ductility is high. At 5 h, the β phase fraction recovers and Sn partitions into the β phase, decreasing the final Sn-rich intergranular phase content. The β phase transforms into fine short-rod and lath-like morphologies, refining grains and yielding optimal strength–ductility synergy, with an ultimate tensile strength (UTS) of 451.6 MPa and an elongation of 41.7%. At 6 h, the β phase fraction decreases and grains coarsen, leading to re-formation of the Sn-rich intergranular phase and degraded strength. Quantitative analysis reveals that solid-solution strengthening provides a stable baseline, while variations in yield strength are dominated by dislocation and grain-boundary strengthening. The β phase provides load-transfer strengthening, and the Sn-rich intergranular phase acts primarily as a damage source. Fracture changes from ductile dimples to mixed ductile–brittle with local flat features, depending on the Sn-rich intergranular phase distribution. This study links processing, microstructure, and properties for optimizing tin brass heat treatment.
Förderung
- Shanghai Municipal Natural Science Foundation
- Science and Technology Commission of Shanghai Municipality
- Natural Science Foundation of Shanghai
Zitieren
APA
Zhai, L., Lu, S., Li, L., Yan, H., Huang, W., Huang, G., Huang, L., & Wu, Y. (2026). Effect of Annealing Time on Microstructure Evolution and Mechanical Properties of Hot-Rolled Cu–Zn–Sn Alloy. Metals, 16(11), 1227. https://doi.org/10.3390/met16111227
Vancouver
Zhai L, Lu S, Li L, Yan H, Huang W, Huang G, et al. Effect of Annealing Time on Microstructure Evolution and Mechanical Properties of Hot-Rolled Cu–Zn–Sn Alloy. Metals. 2026;16(11):1227. doi:10.3390/met16111227
BibTeX
@article{Zhai2026,
author = {Zhai, Longfei and Lu, Shuangli and Li, Lei and Yan, Huan and Huang, Wenyi and Huang, Guojie and Huang, Lei and Wu, Yu},
title = {Effect of Annealing Time on Microstructure Evolution and Mechanical Properties of Hot-Rolled Cu–Zn–Sn Alloy},
journal = {Metals},
year = {2026},
volume = {16},
number = {11},
pages = {1227},
doi = {10.3390/met16111227}
}
EUVIMED