EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stainless Steel in Municipal Sewage—How to Recognize Favorable Corrosion Conditions

Paweł Lochyński iD, Magdalena Domańska iD, Robert Dziedzic iD, Kamila Hamal

Materials · 11.10.2023 · 16 (20) · 6637

DOI: 10.3390/ma16206637 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.10.2023. Verfasst von Paweł Lochyński und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Environmental Engineering, Wroclaw University of Environmental and Life Sciences, pl. Grunwaldzki 24, 50-363 Wroclaw, Poland. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institute of Environmental Engineering of Wroclaw University of Environmental and Life Sciences, Centre for Advanced Manufacturing Technologies of Wroclaw University of Science and Technology, Wroclaw University of Environmental and Life Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

While chromium–nickel steel is known to be extremely resistant to corrosion, the occurrence of certain factors can unfortunately initiate an uncontrolled corrosion process. This paper presents samples made of 304 stainless steel containing delta ferrite that have been exposed to wastewater for 18 months. Samples placed above the surface of the wastewater (A-series) were intensively corroded. Samples half-submerged in the wastewater and periodically fully submerged at higher effluent flows through the screenings and grit separator (B-series) only suffered minor mechanical erosion. No significant changes in the tested surface were observed on samples fully submerged in wastewater (C-series). The results indicated that the observed pitting corrosion of samples placed above the surface of the wastewater was a consequence of the presence of bacteria in a wet hydrogen sulfide environment. The fluorescence in situ hybridization method showed that either the sludge taken from the wastewater, or from the surface of samples submerged in wastewater exhibited increased amounts of bacteria from the δ-proteobacteria class, indicating the presence of microorganisms involved in the reduction of sulfur or sulfate compounds. A new approach to microbiological evaluation by determining classes of bacteria may be a promising tool for evaluating wastewater in terms of aggressiveness and recognizing favorable corrosive conditions.

Schlagwörter

Stichwörter der Autor:innen

austenitebiological corrosionchromium–nickel steeldelta ferritefluorescence in situ hybridization (FISH)pitting corrosion

Autor:innen und Institutionen

  • Institute of Environmental Engineering, Wroclaw University of Environmental and Life Sciences, pl. Grunwaldzki 24, 50-363 Wroclaw, Poland.
  • Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Lukasiewicza 5, 50-371 Wroclaw, Poland.

ORCID-Profile: Paweł Lochyński, Magdalena Domańska, Robert Dziedzic

Förderung

  • Institute of Environmental Engineering of Wroclaw University of Environmental and Life Sciences
  • Centre for Advanced Manufacturing Technologies of Wroclaw University of Science and Technology
  • Wroclaw University of Environmental and Life Sciences
  • Wroclaw University of Science and Technology

Zitieren

APA

Lochyński, P., Domańska, M., Dziedzic, R., & Hamal, K. (2023). Stainless Steel in Municipal Sewage—How to Recognize Favorable Corrosion Conditions. Materials, 16(20), 6637. https://doi.org/10.3390/ma16206637

Vancouver

Lochyński P, Domańska M, Dziedzic R, Hamal K. Stainless Steel in Municipal Sewage—How to Recognize Favorable Corrosion Conditions. Materials. 2023;16(20):6637. doi:10.3390/ma16206637

BibTeX
@article{Lochyski2023,
  author = {Lochyński, Paweł and Domańska, Magdalena and Dziedzic, Robert and Hamal, Kamila},
  title = {Stainless Steel in Municipal Sewage—How to Recognize Favorable Corrosion Conditions},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {20},
  pages = {6637},
  doi = {10.3390/ma16206637}
}
Kostenlos starten →