Energetic characterization during plasma electrolytic polishing of cemented tungsten carbide
Journal of Applied Physics · 21.07.2023 · 134 (3)
DOI: 10.1063/5.0155581 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 19.07.2023. Verfasst von Sehoon An und 7 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 35 Literaturangaben.
Abstract (Originalsprache)
Electrical and thermal measurements were conducted during the plasma electrolytic polishing (PEP) of cemented tungsten carbide (WC-Co) materials to characterize energetic aspects of the process in relation to the temporal development of the gaseous layer near the workpiece. The power transferred to the workpiece is determined using a calorimetric probe and employing the time derivative of the temperature curve. It shows distinct heating phases due to the generation of the gaseous layer. At the beginning of the process, a typical power of 367 ± 17 W is transferred to the workpiece of a surface area of 14 cm2. At longer process times, a stabilized gaseous layer limits the power transferred to the workpiece to 183 ± 3 W. In an attempt to describe the heat transferred to the electrolyte, the electrolyte temperature was measured using a thermocouple situated 15 mm away from the workpiece. The local electrolyte temperature increases from 70 to 81 °C for an immersion depth of 20 mm. Moreover, the spatiotemporal development of the electrolyte temperature was obtained by 2D-hydrodynamic modeling using COMSOL Multiphysics®. The modeling results for the local temporal temperature development are in excellent agreement with the experimental values when the turbulent model is applied up to t = 65 s. Afterward, the laminar model leads to a better agreement. Furthermore, line scan x-ray photoelectron spectroscopy revealed that aliphatic carbon was preferentially removed. Only a slight compositional gradient in the vertical direction after the PEP process was observed.
Zitieren
APA
An, S., Hansen, L., Wolff, T., Foest, R., Fröhlich, M., Quade, A., Stankov, M., & Kersten, H. (2023). Energetic characterization during plasma electrolytic polishing of cemented tungsten carbide. Journal of Applied Physics, 134(3). https://doi.org/10.1063/5.0155581
Vancouver
An S, Hansen L, Wolff T, Foest R, Fröhlich M, Quade A, et al. Energetic characterization during plasma electrolytic polishing of cemented tungsten carbide. Journal of Applied Physics. 2023;134(3). doi:10.1063/5.0155581
BibTeX
@article{An2023,
author = {An, Sehoon and Hansen, Luka and Wolff, Thorben and Foest, Rüdiger and Fröhlich, Maik and Quade, Antje and Stankov, Marjan and Kersten, Holger},
title = {Energetic characterization during plasma electrolytic polishing of cemented tungsten carbide},
journal = {Journal of Applied Physics},
year = {2023},
volume = {134},
number = {3},
doi = {10.1063/5.0155581}
}
EUVIMED