EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Manganese Content on Martensitic Transformation of Cu-Al-Mn-Ag Alloy

Lovro Liverić iD, Tamara Holjevac Grgurić, Vilko Mandić iD, Robert Chulist iD

Materials · 24.08.2023 · 16 (17) · 5782

DOI: 10.3390/ma16175782 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.08.2023. Verfasst von Lovro Liverić und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Engineering, University of Rijeka, Vukovarska 58, 51000 Rijeka, Croatia. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of manganese content on the formation of martensite structure and the final properties of a quaternary Cu-Al-Mn-Ag shape memory alloy (SMA) was investigated. Two alloys with designed compositions, Cu- 9%wt. Al- 16%wt. Mn- 2%wt. Ag and Cu- 9%wt. Al- 7%wt. Mn- 2%wt. Ag, were prepared in an electric arc furnace by melting of high-purity metals. As-cast and quenched microstructures were determined by optical microscopy and scanning electron microscopy equipped with EDS. Phases were confirmed by high-energy synchrotron radiation and electron backscatter diffractions. Austenite and martensite transformations were followed by differential scanning calorimetry and hardness was determined using the Vickers hardness test. It was found that the addition of silver contributes to the formation of the martensite structure in the Cu-Al-Mn-SMA. In the alloy with 7%wt. of manganese, stable martensite is formed even in the as-cast state without additional heat treatment, while the alloy with 16%wt. of manganese martensite transforms only after thermal stabilization and quenching. Two types of martensite, β1′ and γ1′, are confirmed in the Cu-9Al-7Mn-2Ag specimen. The as-cast SMA with 7%wt. Mn showed significantly lower martensite transformation temperatures, Ms and Mf, in relation to the quenched alloy. With increasing manganese content, the Ms and Mf temperatures are shifted to higher values and the microhardness is lower.

Schlagwörter

Stichwörter der Autor:innen

Cu-Al-Mn-Ag alloysheat treatmentmartensitic transformationmicrostructurephase transformationsshape memory alloythermal analysis

Autor:innen und Institutionen

  • Faculty of Engineering, University of Rijeka, Vukovarska 58, 51000 Rijeka, Croatia.
  • School of Medicine, Catholic University of Croatia, Ilica 242, 10000 Zagreb, Croatia.
  • Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 19, 10000 Zagreb, Croatia.
  • Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 25 Reymont Str., 30-059 Krakow, Poland.

ORCID-Profile: Lovro Liverić, Vilko Mandić, Robert Chulist

Zitieren

APA

Liverić, L., Holjevac Grgurić, T., Mandić, V., & Chulist, R. (2023). Influence of Manganese Content on Martensitic Transformation of Cu-Al-Mn-Ag Alloy. Materials, 16(17), 5782. https://doi.org/10.3390/ma16175782

Vancouver

Liverić L, Holjevac Grgurić T, Mandić V, Chulist R. Influence of Manganese Content on Martensitic Transformation of Cu-Al-Mn-Ag Alloy. Materials. 2023;16(17):5782. doi:10.3390/ma16175782

BibTeX
@article{Liveri2023,
  author = {Liverić, Lovro and Holjevac Grgurić, Tamara and Mandić, Vilko and Chulist, Robert},
  title = {Influence of Manganese Content on Martensitic Transformation of Cu-Al-Mn-Ag Alloy},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {17},
  pages = {5782},
  doi = {10.3390/ma16175782}
}
Kostenlos starten →