The Influence of Alumina Airborne-Particle Abrasion with Various Sizes of Alumina Particles on the Phase Transformation and Fracture Resistance of Zirconia-Based Dental Ceramics
Materials · 02.08.2023 · 16 (15) · 5419
DOI: 10.3390/ma16155419 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.08.2023. Verfasst von Paulina Łagodzińska und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Medical University of Lodz, 92-209 Łódź, Poland. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Medical University of Lodz, Poland, Medical University of Lodz.
Abstract (Originalsprache)
The surface of zirconia-based dental ceramic restorations require preparation prior to adhesive cementation. The purpose of this study was to assess the influence of airborne-particle abrasion with different sizes of alumina particles (50 μm, 110 μm, or 250 μm) on the mechanical strength of zirconia-based ceramics’ frameworks and on the extent of phase transformations. A fracture resistance test was performed. The central surface of the frameworks was subjected to a load [N]. The identification and quantitative determination of the crystalline phase present in the zirconia specimens was assessed using X-ray diffraction. The Kruskal–Wallis one-way analysis of variance was used to establish significance (α = 0.05). The fracture resistance of zirconia-based frameworks significantly increases with an increase in the size of alumina particles used for air abrasion: 715.5 N for 250 μm alumina particles, 661.1 N for 110 μm, 608.7 N for 50 μm and the lowest for the untreated specimens (364.2 N). The X-ray diffraction analysis showed an increase in the monoclinic phase content after air abrasion: 50 μm alumina particles—26%, 110 μm—40%, 250 μm—56%, and no treatment—none. Air abrasion of the zirconia-based dental ceramics’ surface with alumina particles increases the fracture resistance of zirconia copings and the monoclinic phase volume. This increase is strongly related to the alumina particle size.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics, Medical University of Lodz, 92-209 Łódź, Poland.
- University Laboratory of Material Research, Medical University of Lodz, 92-209 Łódź, Poland.
ORCID-Profile: Paulina Łagodzińska, Beata Dejak, Michał Krasowski
Förderung
- Medical University of Lodz, Poland
- Medical University of Lodz
Zitieren
APA
Łagodzińska, P., Dejak, B., Krasowski, M., & Konieczny, B. (2023). The Influence of Alumina Airborne-Particle Abrasion with Various Sizes of Alumina Particles on the Phase Transformation and Fracture Resistance of Zirconia-Based Dental Ceramics. Materials, 16(15), 5419. https://doi.org/10.3390/ma16155419
Vancouver
Łagodzińska P, Dejak B, Krasowski M, Konieczny B. The Influence of Alumina Airborne-Particle Abrasion with Various Sizes of Alumina Particles on the Phase Transformation and Fracture Resistance of Zirconia-Based Dental Ceramics. Materials. 2023;16(15):5419. doi:10.3390/ma16155419
BibTeX
@article{agodziska2023,
author = {Łagodzińska, Paulina and Dejak, Beata and Krasowski, Michał and Konieczny, Bartłomiej},
title = {The Influence of Alumina Airborne-Particle Abrasion with Various Sizes of Alumina Particles on the Phase Transformation and Fracture Resistance of Zirconia-Based Dental Ceramics},
journal = {Materials},
year = {2023},
volume = {16},
number = {15},
pages = {5419},
doi = {10.3390/ma16155419}
}
EUVIMED