The Influence of Geometry, Surface Texture, and Cooling Method on the Efficiency of Heat Dissipation through the Heat Sink—A Review
Materials · 29.07.2023 · 16 (15) · 5348
DOI: 10.3390/ma16155348 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 29.07.2023. Verfasst von Karol Grochalski und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Poznan University of Technology, Piotrowo 3, 60-965 Poznan, Poland. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and Science of the Republic of Poland.
Abstract (Originalsprache)
The performance of a heat sink is significantly influenced by the type of cooling used: passive or active (forced), the shape of the heat sink, and the material from which it is made. This paper presents a review of the literature on the influence of geometry and surface parameters on effective heat transfer in heat sinks. The results of simulation studies for three different heat sink fin geometries and cooling types are presented. Furthermore, the influence of the surface texture of the heat sink fins on the heat transfer efficiency was determined. It was shown that the best performance in terms of geometries was that of a wave fin heat sink. When the surface texture was analyzed, it was found that an increase in the amplitude values of the texture decreases the heat dissipation efficiency in the case of active cooling, while for passive cooling, an increase in these parameters has a beneficial effect and increases the effective heat transfer to the surroundings. The cooling method was found to be the most important factor affecting heat dissipation efficiency. Forced airflow results in more efficient heat transfer from the heat sink fins to the surroundings.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Poznan University of Technology, Piotrowo 3, 60-965 Poznan, Poland.
- Faculty of Civil Engineering and Transport, Poznan University of Technology, Piotrowo 3, 60-965 Poznan, Poland.
- TRAG Sp. z o.o. Sp.k., Wschodnia 5B, 62-080 Swadzim, Poland.
- Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, 35-959 Rzeszow, Poland.
ORCID-Profile: Karol Grochalski, Michał Wieczorowski
Förderung
- Ministry of Education and Science of the Republic of Poland
Zitieren
APA
Grochalski, K., Rukat, W., Jakubek, B., Wieczorowski, M., Słowiński, M., Sarbinowska, K., & Graboń, W. (2023). The Influence of Geometry, Surface Texture, and Cooling Method on the Efficiency of Heat Dissipation through the Heat Sink—A Review. Materials, 16(15), 5348. https://doi.org/10.3390/ma16155348
Vancouver
Grochalski K, Rukat W, Jakubek B, Wieczorowski M, Słowiński M, Sarbinowska K, et al. The Influence of Geometry, Surface Texture, and Cooling Method on the Efficiency of Heat Dissipation through the Heat Sink—A Review. Materials. 2023;16(15):5348. doi:10.3390/ma16155348
BibTeX
@article{Grochalski2023,
author = {Grochalski, Karol and Rukat, Wojciech and Jakubek, Bartosz and Wieczorowski, Michał and Słowiński, Marcin and Sarbinowska, Karolina and Graboń, Wiesław},
title = {The Influence of Geometry, Surface Texture, and Cooling Method on the Efficiency of Heat Dissipation through the Heat Sink—A Review},
journal = {Materials},
year = {2023},
volume = {16},
number = {15},
pages = {5348},
doi = {10.3390/ma16155348}
}
EUVIMED