EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Molecular Weight on the Enzymatic Degradation of PLA Isomer Blends by a Langmuir System

Donghyeok Im, Vishal Gavande iD, Hak Yong Lee, Won-Ki Lee iD

Materials · 19.07.2023 · 16 (14) · 5087

DOI: 10.3390/ma16145087 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.07.2023. Verfasst von Donghyeok Im und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymer Engineering, Pukyong National University, Busan 48513, Republic of Korea. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Research Funds of Ministry of Trade, Industry and Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polylactides (PLAs) and lactide copolymers are biodegradable, compostable, and derived from renewable resources, offering a sustainable alternative to petroleum-based synthetic polymers owing to their advantages of comparable mechanical properties with commodity plastics and biodegradability. Their hydrolytic stability and thermal properties can affect their potential for long-lasting applications. However, stereocomplex crystallization is a robust method between isomer PLAs that allows significant amelioration in copolymer properties, such as thermal stability, mechanical properties, and biocompatibility, through substantial intermolecular interactions amid l-lactyl and d-lactyl sequences, which have been the key approach to initial degradation rate and further PLA applications. It was demonstrated that the essential parameters affecting stereocomplexation are the mixing ratio and the chain length of each unit sequence. This study deals with the molecular weight, one of the specific interactions between isomers of PLAs. A solution polymerization method was applied to control molecular weight and chain architecture. The stereocomplexation was monitored with DSC. It was confirmed that the lower molecular weight polymer showed a higher degradation rate, as a hydrolyzed fragment having a molecular weight below a certain length dissolves into the water. To systematically explore the critical contribution of molecular weights, the Langmuir system was used to observe the stereocomplexation effect and the overall degradation rate.

Schlagwörter

Stichwörter der Autor:innen

Langmuir monolayerbiodegradable polymerenzymatic degradationstereochemical polylactidesstereocomplex

Autor:innen und Institutionen

  • Department of Polymer Engineering, Pukyong National University, Busan 48513, Republic of Korea.
  • Fine & Specialty Chemical Research Group, Korea Institute of Footwear & Leather Technology, Busan 47154, Republic of Korea.
  • Research Center for Bio-Based Chemistry, Korea Research Institute of Chemical Technology, Ulsan 44429, Republic of Korea.

ORCID-Profile: Vishal Gavande, Won-Ki Lee

Förderung

  • Ministry of Trade, Industry and Energy
  • Research Funds of Ministry of Trade, Industry and Energy

Zitieren

APA

Im, D., Gavande, V., Lee, H. Y., & Lee, W. K. (2023). Influence of Molecular Weight on the Enzymatic Degradation of PLA Isomer Blends by a Langmuir System. Materials, 16(14), 5087. https://doi.org/10.3390/ma16145087

Vancouver

Im D, Gavande V, Lee HY, Lee WK. Influence of Molecular Weight on the Enzymatic Degradation of PLA Isomer Blends by a Langmuir System. Materials. 2023;16(14):5087. doi:10.3390/ma16145087

BibTeX
@article{Im2023,
  author = {Im, Donghyeok and Gavande, Vishal and Lee, Hak Yong and Lee, Won-Ki},
  title = {Influence of Molecular Weight on the Enzymatic Degradation of PLA Isomer Blends by a Langmuir System},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {14},
  pages = {5087},
  doi = {10.3390/ma16145087}
}
Kostenlos starten →