EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of the Molecular Weight of Poly(Ethylene Oxide) on the Hydrolytic Degradation and Physical Properties of Polycaprolactone Binary Blends

Maurice Dalton, Farnoosh Ebrahimi, Han Xu, Ke Gong, Gustavo Fehrenbach, Evert Fuenmayor, Emma J. Murphy, Ian Major

Macromol · 03.07.2023 · 3 (3) · 431-450

DOI: 10.3390/macromol3030026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromol, online erschienen am 03.07.2023. Verfasst von Maurice Dalton und 7 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of biodegradable polymers in tissue engineering has been widely researched due to their ability to degrade and release their components in a controlled manner, allowing for the potential regeneration of tissues. Melt blending is a common method for controlling the degradation rate of these polymers, which involves combining these materials in a molten state to create a homogenous mixture with tailored properties. In this study, polycaprolactone (PCL) was melt blended with hydrophilic poly (ethylene oxide) (PEO) of different molecular weights to assess its effect on PCL material performance. Hydrolytic degradation, thermal and viscoelastic properties, and surface hydrophilicity were performed to contrast the properties of the blends. DSC, DMA, and FTIR were performed on selected degraded PCL/PEO specimens following mass loss studies. The results showed that adding PEO to PCL reduced its melt viscosity-torque and melt temperature while increasing its hydrophilicity, optimizing PCL/PEO blend for soft tissue engineering applications and could contribute to the development of more effective and biocompatible materials for soft tissue regeneration.

Zitieren

APA

Dalton, M., Ebrahimi, F., Xu, H., Gong, K., Fehrenbach, G., Fuenmayor, E., Murphy, E. J., & Major, I. (2023). The Influence of the Molecular Weight of Poly(Ethylene Oxide) on the Hydrolytic Degradation and Physical Properties of Polycaprolactone Binary Blends. Macromol, 3(3), 431-450. https://doi.org/10.3390/macromol3030026

Vancouver

Dalton M, Ebrahimi F, Xu H, Gong K, Fehrenbach G, Fuenmayor E, et al. The Influence of the Molecular Weight of Poly(Ethylene Oxide) on the Hydrolytic Degradation and Physical Properties of Polycaprolactone Binary Blends. Macromol. 2023;3(3):431-450. doi:10.3390/macromol3030026

BibTeX
@article{Dalton2023,
  author = {Dalton, Maurice and Ebrahimi, Farnoosh and Xu, Han and Gong, Ke and Fehrenbach, Gustavo and Fuenmayor, Evert and Murphy, Emma J. and Major, Ian},
  title = {The Influence of the Molecular Weight of Poly(Ethylene Oxide) on the Hydrolytic Degradation and Physical Properties of Polycaprolactone Binary Blends},
  journal = {Macromol},
  year = {2023},
  volume = {3},
  number = {3},
  pages = {431--450},
  doi = {10.3390/macromol3030026}
}
Kostenlos starten →