Effect of MBF-20 Interlayer on the Microstructure and Corrosion Behaviour of Inconel 625 Super Alloy after Diffusion Brazing
Materials · 18.07.2023 · 16 (14) · 5072
DOI: 10.3390/ma16145072 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 18.07.2023. Verfasst von Alireza Doroudi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mining and Metallurgical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran 15875-4413, Iran. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FRGS.
Abstract (Originalsprache)
The joining zone includes three main parts, which comprise an isothermal solidification zone (ISZ), the athermal solidification zone (ASZ), and a diffusion affected zone (DAZ). Field emission scanning electron microscopy (FESEM) was used here to observe the microstructure equipped with ultra-thin window energy dispersive X-ray spectrometer (EDS) system. Additionally, electrochemical impedance spectroscopy (EIS) and cyclic potentiodynamic polarization tests were conducted to evaluate the effect of the DB process on the corrosion resistance of the Inconel 625 superalloy. In the bonding time period, some Mo- and Cr-rich boride precipitations and Ni-rich γ-solid solution phases with hardened alloy elements, such as Mo and Cr, formed in DAZ and ASZ, respectively, because of the inter-diffusion of melting point depressants (MPD). Moreover, during cooling cycles, Ni-Cr-B, Ni-Mo-B, Ni-Si-B, and Ni-Si phase compounds were formed in the ASZ area at 1110–850 °C. The DAZ area developed by borides compound with cubic, needle, and grain boundary morphologies. The corrosion tests indicated that the DB process led to a reduction in the passive region and increased the sensitivity to pitting corrosion.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mining and Metallurgical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran 15875-4413, Iran.
- Corrosion Engineering and Material Protection Group, Bandar Abbas Campus, Amirkabir University of Technology (Tehran Polytechnic), Tehran 15875-4413, Iran.
- Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, University Kebangsaan Malaysia (UKM), Bangi 43600, Selangor, Malaysia.
ORCID-Profile: Alireza Doroudi, Armin Rajabi, Amir Hossein Baghdadi
Förderung
- FRGS
Zitieren
APA
Doroudi, A., Omidvar, H., Dastgheib, A., Khorram, M., Rajabi, A., Baghdadi, A. H., & Ghazali, M. J. (2023). Effect of MBF-20 Interlayer on the Microstructure and Corrosion Behaviour of Inconel 625 Super Alloy after Diffusion Brazing. Materials, 16(14), 5072. https://doi.org/10.3390/ma16145072
Vancouver
Doroudi A, Omidvar H, Dastgheib A, Khorram M, Rajabi A, Baghdadi AH, et al. Effect of MBF-20 Interlayer on the Microstructure and Corrosion Behaviour of Inconel 625 Super Alloy after Diffusion Brazing. Materials. 2023;16(14):5072. doi:10.3390/ma16145072
BibTeX
@article{Doroudi2023,
author = {Doroudi, Alireza and Omidvar, Hamid and Dastgheib, Ali and Khorram, Mohammad and Rajabi, Armin and Baghdadi, Amir Hossein and Ghazali, Mariyam Jameelah},
title = {Effect of MBF-20 Interlayer on the Microstructure and Corrosion Behaviour of Inconel 625 Super Alloy after Diffusion Brazing},
journal = {Materials},
year = {2023},
volume = {16},
number = {14},
pages = {5072},
doi = {10.3390/ma16145072}
}
EUVIMED