EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Clearance Angle on Tool Life, Cutting Forces, Surface Roughness, and Delamination during Carbon-Fiber-Reinforced Plastic Milling

Tomáš Knápek iD, Štěpánka Dvořáčková iD, Martin Váňa

Materials · 14.07.2023 · 16 (14) · 5002

DOI: 10.3390/ma16145002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.07.2023. Verfasst von Tomáš Knápek und 2 weiteren Autor:innen. Beteiligte Einrichtung: Assembly and Engineering Metrology, Department of Machining, Faculty of Mechanical Engineering, Technical University of Liberec, 461 17 Liberec, Czec…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technical University of Liberec.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to investigate the effect of the clearance angle of the milling tool on wear, cutting forces, machined edge roughness, and delamination during non-contiguous milling of carbon-fiber-reinforced plastic (CFRP) composite panels with a twill weave and 90° fiber orientation. To achieve the objective of the study, it was first necessary to design suitable tools (6 mm diameter sintered carbide shank milling cutters) with a variety of clearance angles (8.4°, 12.4°, and 16.4°) and all the machinery and measuring equipment for the research to be carried out. Furthermore, measurement and evaluation methods for cutting tool wear, cutting forces, machined edge roughness, and delamination were developed. Last but not least, the results obtained during the research were summarized and evaluated. From the experiments conducted in this study, it was found that the tool clearance angle has a significant effect on tool wear, roughness of the machined surface, and delamination of the carbon fiber composite board. The tool with a clearance angle of 8.4° wore faster than the tool with a clearance angle of 16.4°. The same trend was observed for cutting force, machined surface roughness, and delamination. In this context, it was also shown that the cutting force increased as the tool wear increased, which in turn increased surface roughness and delamination. These results are of practical significance, not only in terms of the quality of the machined surface but also in terms of time, cost, and energy savings when machining CFRP composite materials.

Schlagwörter

Stichwörter der Autor:innen

CFRPdelaminationmillingtool parameterstool wear

Autor:innen und Institutionen

  • Assembly and Engineering Metrology, Department of Machining, Faculty of Mechanical Engineering, Technical University of Liberec, 461 17 Liberec, Czech Republic.

ORCID-Profile: Tomáš Knápek, Štěpánka Dvořáčková

Förderung

  • Technical University of Liberec

Zitieren

APA

Knápek, T., Dvořáčková, Š., & Váňa, M. (2023). The Effect of Clearance Angle on Tool Life, Cutting Forces, Surface Roughness, and Delamination during Carbon-Fiber-Reinforced Plastic Milling. Materials, 16(14), 5002. https://doi.org/10.3390/ma16145002

Vancouver

Knápek T, Dvořáčková Š, Váňa M. The Effect of Clearance Angle on Tool Life, Cutting Forces, Surface Roughness, and Delamination during Carbon-Fiber-Reinforced Plastic Milling. Materials. 2023;16(14):5002. doi:10.3390/ma16145002

BibTeX
@article{Knpek2023,
  author = {Knápek, Tomáš and Dvořáčková, Štěpánka and Váňa, Martin},
  title = {The Effect of Clearance Angle on Tool Life, Cutting Forces, Surface Roughness, and Delamination during Carbon-Fiber-Reinforced Plastic Milling},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {14},
  pages = {5002},
  doi = {10.3390/ma16145002}
}
Kostenlos starten →