Effect of Strain Rates and Heat Exposure on Polyamide (PA12) Processed via Selective Laser Sintering
Materials · 28.06.2023 · 16 (13) · 4654
DOI: 10.3390/ma16134654 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.06.2023. Verfasst von Chiara Morano und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical, Energy and Management Engineering, University of Calabria, 87036 Rende, Italy. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The use of polymers in the transportation industry represents a great opportunity to meet the growing demand for lightweight structures and to reduce polluting emissions. In this context, additive manufacturing represents a very effective fabrication route for mechanical components with sophisticated geometry that cannot be pursued by conventional methods. However, understanding the mechanical properties of 3D-printed polymers plays a crucial role in the performance and durability of polymer-based products. Polyamide is a commonly used material in 3D printing because of its excellent mechanical properties. However, the layer-by-layer deposition process and ensuing auxiliary steps (e.g., post-processing heating) may affect the microstructure and mechanical properties of 3D-printed nylon with respect to the bulk counterpart. In this work, we explore the effect of displacement rate and heat exposure on the mechanical properties of 3D-printed polyamide (PA12) specimens obtained by selective laser sintering (SLS). Moreover, the thermal characteristics of the powders and sintered material were evaluated using differential scanning calorimetry (DSC). Our results highlight the expected rate dependency of mechanical properties and show that a post-processing heat treatment partly affects mechanical behavior.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical, Energy and Management Engineering, University of Calabria, 87036 Rende, Italy.
- Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON N2L 3G1, Canada.
ORCID-Profile: Chiara Morano, Marco Alfano, Leonardo Pagnotta
Zitieren
APA
Morano, C., Alfano, M., & Pagnotta, L. (2023). Effect of Strain Rates and Heat Exposure on Polyamide (PA12) Processed via Selective Laser Sintering. Materials, 16(13), 4654. https://doi.org/10.3390/ma16134654
Vancouver
Morano C, Alfano M, Pagnotta L. Effect of Strain Rates and Heat Exposure on Polyamide (PA12) Processed via Selective Laser Sintering. Materials. 2023;16(13):4654. doi:10.3390/ma16134654
BibTeX
@article{Morano2023,
author = {Morano, Chiara and Alfano, Marco and Pagnotta, Leonardo},
title = {Effect of Strain Rates and Heat Exposure on Polyamide (PA12) Processed via Selective Laser Sintering},
journal = {Materials},
year = {2023},
volume = {16},
number = {13},
pages = {4654},
doi = {10.3390/ma16134654}
}
EUVIMED