EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of Abrasive Water Jet Machining as a Texturing Operation for Thin Aluminium Alloy UNS A92024

Fermin Bañon iD, Alejandro Sambruno iD, Pedro F Mayuet iD, Álvaro Gómez-Parra iD

Materials · 19.05.2023 · 16 (10) · 3843

DOI: 10.3390/ma16103843 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.05.2023. Verfasst von Fermin Bañon und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil, Materials and Manufacturing Engineering, University of Malaga, C/Dr. Ortiz Ramos s/n, 9071 Malaga, Spain. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface modification of metallic alloys can create hydrophilic or hydrophobic surfaces that enhance the functional performance of the material. For example, hydrophilic surfaces have improved wettability, which improves mechanical anchorage in adhesive bonding operations. This wettability is directly related to the type of texture created on the surface and the roughness obtained after the surface modification process. This paper presents the use of abrasive water jetting as an optimal technology for the surface modification of metal alloys. A correct combination of high traverse speeds at low hydraulic pressures minimises the power of the water jet and allows for the removal of small layers of material. The erosive nature of the material removal mechanism creates a high surface roughness, which increases its surface activation. In this way, the influence of texturing with and without abrasive has been evaluated, reaching combinations where the absence of abrasive particles can produce surfaces of interest. In the results obtained, the influence of the most relevant texturing parameters between hydraulic pressure, traverse speed, abrasive flow and spacing has been determined. This has allowed a relationship to be established between these variables and surface quality in terms of Sa, Sz and Sk, as well as wettability.

Schlagwörter

Stichwörter der Autor:innen

AWJMabrasivesurface qualitytexturingwaterjetwettability

Autor:innen und Institutionen

  • Department of Civil, Materials and Manufacturing Engineering, University of Malaga, C/Dr. Ortiz Ramos s/n, 9071 Malaga, Spain.
  • School of Engineering, Mechanical Engineering and Industrial Design Department, University of Cadiz, Av. Universidad de Cadiz 10, Puerto Real, 11519 Cadiz, Spain.

ORCID-Profile: Fermin Bañon, Alejandro Sambruno, Pedro F Mayuet, Álvaro Gómez-Parra

Zitieren

APA

Bañon, F., Sambruno, A., Mayuet, P. F., & Gómez-Parra, Á. (2023). Study of Abrasive Water Jet Machining as a Texturing Operation for Thin Aluminium Alloy UNS A92024. Materials, 16(10), 3843. https://doi.org/10.3390/ma16103843

Vancouver

Bañon F, Sambruno A, Mayuet PF, Gómez-Parra Á. Study of Abrasive Water Jet Machining as a Texturing Operation for Thin Aluminium Alloy UNS A92024. Materials. 2023;16(10):3843. doi:10.3390/ma16103843

BibTeX
@article{Baon2023,
  author = {Bañon, Fermin and Sambruno, Alejandro and Mayuet, Pedro F and Gómez-Parra, Álvaro},
  title = {Study of Abrasive Water Jet Machining as a Texturing Operation for Thin Aluminium Alloy UNS A92024},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3843},
  doi = {10.3390/ma16103843}
}
Kostenlos starten →