EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Reduction Sequence during Rolling on Deformed Texture and Anisotropy of Ferritic Stainless Steel

Sang Heon Cho, Young Jin Lee, Warda Bahanan, Jeong Moo Oh, Dong-Ju Kim, Jee-Hyun Kang iD, Jungho Ryu iD, I Putu Widiantara, Young Gun Ko iD

Materials · 16.05.2023 · 16 (10) · 3767

DOI: 10.3390/ma16103767 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.05.2023. Verfasst von Sang Heon Cho und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yeungnam University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This investigation studied the effect of reduction sequence during rolling of ferritic stainless steel on texture and anisotropy. A series of thermomechanical processes were performed on the present samples utilizing rolling deformation, with a total height reduction of 83% but with different reduction sequences, 67% + 50% (route A) and 50% + 67% (route B). Microstructural analysis showed that no significant difference was found in terms of the grain morphology between route A and route B. In terms of the texture, as compared to route A, route B developed a sharper texture on all components along the γ-fiber and a considerably higher fraction of boundaries that displayed 38°111 misorientations with respect to the surrounding deformed grains. In consequence, optimal deep drawing properties were achieved, where rm was maximized and Δr was minimized. Moreover, despite the similar morphology between the two processes, the resistance toward ridging was improved in the case of route B. This was explained in relation to the selective growth-controlled recrystallization, which favors the formation of microstructure with homogeneous distribution of the //ND orientation.

Schlagwörter

Stichwörter der Autor:innen

anisotropyreduction sequencerollingstainless steeltexture

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea.
  • Hyundai BNG Steel Co., Ltd., Changwon 51707, Republic of Korea.
  • SeA Mechanics Co., Ltd., Gumi 39379, Republic of Korea.

ORCID-Profile: Jee-Hyun Kang, Jungho Ryu, Young Gun Ko

Förderung

  • Yeungnam University

Zitieren

APA

Cho, S. H., Lee, Y. J., Bahanan, W., Oh, J. M., Kim, D. J., Kang, J. H., Ryu, J., Widiantara, I. P., & Ko, Y. G. (2023). Effect of Reduction Sequence during Rolling on Deformed Texture and Anisotropy of Ferritic Stainless Steel. Materials, 16(10), 3767. https://doi.org/10.3390/ma16103767

Vancouver

Cho SH, Lee YJ, Bahanan W, Oh JM, Kim DJ, Kang JH, et al. Effect of Reduction Sequence during Rolling on Deformed Texture and Anisotropy of Ferritic Stainless Steel. Materials. 2023;16(10):3767. doi:10.3390/ma16103767

BibTeX
@article{Cho2023,
  author = {Cho, Sang Heon and Lee, Young Jin and Bahanan, Warda and Oh, Jeong Moo and Kim, Dong-Ju and Kang, Jee-Hyun and Ryu, Jungho and Widiantara, I Putu and Ko, Young Gun},
  title = {Effect of Reduction Sequence during Rolling on Deformed Texture and Anisotropy of Ferritic Stainless Steel},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3767},
  doi = {10.3390/ma16103767}
}
Kostenlos starten →