Effect of Double Cold Rolling and Annealing on Texture Evolution and Mechanical Response of Ultrathin Ferritic Steel
Applied Sciences · 16.06.2026 · 16 (12) · 6071
DOI: 10.3390/app16126071 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 16.06.2026. Verfasst von Laura G. Castruita-Ávila und 6 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CONACYT.
Abstract (Originalsprache)
The influence of double continuous cold rolling followed by annealing on the texture evolution and mechanical properties of a commercial low-carbon ferritic steel was investigated. Ultrathin sheets (final thickness 0.22 mm) were produced through a two-stage cold rolling process with intermediate and final annealing at 690 °C for 35 s, followed by light temper rolling at 100 °C for 20 s. Texture evolution was characterized using Electron Backscatter Diffraction (EBSD) with Orientation Imaging Microscopy (OIM), producing pole figures and orientation distribution functions (ODFs). Mechanical properties were evaluated through Vickers microhardness and ultimate tensile strength measurements obtained from three independent locations per sample. Quantitative ODF analysis (φ2 = 45°) revealed that γ-fiber ({111}//ND) intensity increased after each cold reduction stage and decreased after annealing due to recrystallization. The α-fiber (110/RD) and cube components (001//RD) showed a slight increase after annealing. The final ultrathin sheet exhibited moderate γ-fiber intensity (≈3 M.R.D), low Vickers microhardness (100–150 HV), and tensile strength (400–450 MPa). These results demonstrate controlled evolution of texture and microstructure during double cold rolling and annealing, providing a basis for future studies on forming-related behavior without directly assessing formability.
Förderung
- CONACYT
Zitieren
APA
Castruita-Ávila, L. G., García-Pastor, F. A., Castro-Román, M. D. J., Camporredondo-Saucedo, J. E., Equihua-Guillén, F., García-Lara, A. M., & Unfried-Silgado, J. (2026). Effect of Double Cold Rolling and Annealing on Texture Evolution and Mechanical Response of Ultrathin Ferritic Steel. Applied Sciences, 16(12), 6071. https://doi.org/10.3390/app16126071
Vancouver
Castruita-Ávila LG, García-Pastor FA, Castro-Román MDJ, Camporredondo-Saucedo JE, Equihua-Guillén F, García-Lara AM, et al. Effect of Double Cold Rolling and Annealing on Texture Evolution and Mechanical Response of Ultrathin Ferritic Steel. Applied Sciences. 2026;16(12):6071. doi:10.3390/app16126071
BibTeX
@article{Castruitavila2026,
author = {Castruita-Ávila, Laura G. and García-Pastor, Francisco Alfredo and Castro-Román, Manuel de Jesús and Camporredondo-Saucedo, Jesús Emilio and Equihua-Guillén, Fabián and García-Lara, Adrián Moisés and Unfried-Silgado, Jimy},
title = {Effect of Double Cold Rolling and Annealing on Texture Evolution and Mechanical Response of Ultrathin Ferritic Steel},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {12},
pages = {6071},
doi = {10.3390/app16126071}
}
EUVIMED