EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation on the Influence of Fiber Bundle Undulating Architecture on Tensile Behavior of Filament Wound Composite Laminates

Hao Liu, Haixiao Hu, Dongfeng Cao, Yundong Ji, Xiangjiang Wang, Hongda Chen, Shuxin Li

Materials · 12.05.2023 · 16 (10) · 3697

DOI: 10.3390/ma16103697 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.05.2023. Verfasst von Hao Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory, National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In filament wound composites, fiber bundles cross each other and form an undulating architecture, which may significantly affect the mechanical behavior of composites. In this study, the tensile mechanical behavior of filament wound laminates was studied experimentally and numerically, and the influences of the bundle thickness and winding angle on the mechanical behavior of the filament wound plates were also explored. In the experiments, tensile tests were carried out on filament wound plates and laminated plates. It was found that, compared to laminated plates, filament wound plates had lower stiffness, greater failure displacement, similar failure loads, and more obvious strain concentration areas. In numerical analysis, mesoscale finite element models, which take into account the fiber bundles’ undulating morphology, were created. The numerical predictions correlated well with the experimental ones. Further numerical studies have shown that the stiffness reduction coefficient of filament wound plates with a winding angle of ±55° decreased from 0.78 to 0.74 as the bundle thickness increased from 0.4 mm to 0.8 mm. The stiffness reduction coefficients of filament wound plates with wound angles of ±15°, ±25°, and ±45° were 0.86, 0.83, and 0.8, respectively.

Schlagwörter

Stichwörter der Autor:innen

digital image correlationfiber bundle undulating architecturefilament wound compositesfinite element model

Autor:innen und Institutionen

  • Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, Wuhan University of Technology, Wuhan 430070, China.
  • Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory, Foshan 528000, China.
  • Institute of Advanced Materials and Manufacturing Technology, Wuhan University of Technology, Wuhan 430070, China.
  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China.

Förderung

  • Fundamental Research Funds for Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory
  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Liu, H., Hu, H., Cao, D., Ji, Y., Wang, X., Chen, H., & Li, S. (2023). Investigation on the Influence of Fiber Bundle Undulating Architecture on Tensile Behavior of Filament Wound Composite Laminates. Materials, 16(10), 3697. https://doi.org/10.3390/ma16103697

Vancouver

Liu H, Hu H, Cao D, Ji Y, Wang X, Chen H, et al. Investigation on the Influence of Fiber Bundle Undulating Architecture on Tensile Behavior of Filament Wound Composite Laminates. Materials. 2023;16(10):3697. doi:10.3390/ma16103697

BibTeX
@article{Liu2023,
  author = {Liu, Hao and Hu, Haixiao and Cao, Dongfeng and Ji, Yundong and Wang, Xiangjiang and Chen, Hongda and Li, Shuxin},
  title = {Investigation on the Influence of Fiber Bundle Undulating Architecture on Tensile Behavior of Filament Wound Composite Laminates},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3697},
  doi = {10.3390/ma16103697}
}
Kostenlos starten →