Dry Friction Properties of Friction Subsets and Angle Related to Surface Texture of Cemented Carbide by Femtosecond Laser Surface Texturing
Coatings · 05.04.2023 · 13 (4) · 741
DOI: 10.3390/coatings13040741 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 05.04.2023. Verfasst von Hang Cheng und 2 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the Nature Science Foundation of Guizhou Provincial Science and Technology Department.
Abstract (Originalsprache)
This paper investigated the use of laser surface texturing (LST) to improve the tribological properties of YG6X cemented carbide. Three different spaced groove textures were processed on the surface of the YG6X carbide samples using a femtosecond laser. Friction experiments and friction simulations were performed under two friction subsets and two friction directions. The testing results showed that when the area density was 46%, the texture surface was beneficial when sliding against Si3N4, but not beneficial in reducing the coefficient of friction when sliding against Ti6Al4V titanium alloy. At area densities of 23% and 15.3%, the texture surface was beneficial when sliding against Si3N4, but not beneficial when sliding against the Ti6Al4V titanium alloy. When selecting the friction direction at 45° to the area density of 15.3%, the texture surface was not beneficial when sliding against the Si3N4 and Ti6Al4V titanium alloy. Sliding with Si3N4, the higher the stress value, the more easily the material was destroyed, leading to an elevated coefficient of friction and wear area. Sliding with Ti6Al4V titanium alloy, the higher the stress value of Ti6Al4V titanium alloy, the more easily the Ti6Al4V titanium alloy wore and generated a large number of abrasive chips.
Förderung
- the National Natural Science Foundation of China
- the Nature Science Foundation of Guizhou Provincial Science and Technology Department
Zitieren
APA
Cheng, H., Zhou, F., & Fei, Z. (2023). Dry Friction Properties of Friction Subsets and Angle Related to Surface Texture of Cemented Carbide by Femtosecond Laser Surface Texturing. Coatings, 13(4), 741. https://doi.org/10.3390/coatings13040741
Vancouver
Cheng H, Zhou F, Fei Z. Dry Friction Properties of Friction Subsets and Angle Related to Surface Texture of Cemented Carbide by Femtosecond Laser Surface Texturing. Coatings. 2023;13(4):741. doi:10.3390/coatings13040741
BibTeX
@article{Cheng2023,
author = {Cheng, Hang and Zhou, Fang and Fei, Zihao},
title = {Dry Friction Properties of Friction Subsets and Angle Related to Surface Texture of Cemented Carbide by Femtosecond Laser Surface Texturing},
journal = {Coatings},
year = {2023},
volume = {13},
number = {4},
pages = {741},
doi = {10.3390/coatings13040741}
}
EUVIMED