EUVIMEDEUVIMED entdecken
Crossref

Optimal Design and Curing Deformation Verification of Carbon Fiber/Epoxy Resin Multi‐Coupled Laminates With Extension‐Shearing Coupling Effect

Shunyu Xu, Mingming Nie, Guanghui Wang, Dingding Chen, Suli Xing, Changping Yin, Jinshui Yang

Polymer Composites · 10.06.2026 · 47 (11) · 10482-10496

DOI: 10.1002/pc.70907 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 31.03.2026. Verfasst von Shunyu Xu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Gefördert von: Key Research and Development Program of Hunan Province of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the issues of complex ply angles and unclear curing deformation mechanisms in carbon fiber/epoxy resin (CF/EP) multi‐coupled laminates, this study carried out optimal design and curing deformation verification. By introducing geometric factors of composites and based on hygrothermal stability conditions, the necessary and sufficient conditions for achieving hygrothermal stability in such multi‐coupled laminates were derived. A criterion for measuring curing deformation was proposed. Using a genetic algorithm (GA), asymmetric multi‐coupled laminates with extension‐shearing coupling were optimized, resulting in a ply scheme based on common engineering angles (0°, ±45°, 90°). Corresponding composite laminates were fabricated via compression molding, and their curing deformation was measured by laser scanning. Experimental and simulation results show that the curing warpage of the multi‐coupled laminates can be controlled within 0.5% of the side length, and the simulation error of curing deformation can be kept within 20%.

Förderung

  • Key Research and Development Program of Hunan Province of China

Zitieren

APA

Xu, S., Nie, M., Wang, G., Chen, D., Xing, S., Yin, C., & Yang, J. (2026). Optimal Design and Curing Deformation Verification of Carbon Fiber/Epoxy Resin Multi‐Coupled Laminates With Extension‐Shearing Coupling Effect. Polymer Composites, 47(11), 10482-10496. https://doi.org/10.1002/pc.70907

Vancouver

Xu S, Nie M, Wang G, Chen D, Xing S, Yin C, et al. Optimal Design and Curing Deformation Verification of Carbon Fiber/Epoxy Resin Multi‐Coupled Laminates With Extension‐Shearing Coupling Effect. Polymer Composites. 2026;47(11):10482-10496. doi:10.1002/pc.70907

BibTeX
@article{Xu2026,
  author = {Xu, Shunyu and Nie, Mingming and Wang, Guanghui and Chen, Dingding and Xing, Suli and Yin, Changping and Yang, Jinshui},
  title = {Optimal Design and Curing Deformation Verification of Carbon Fiber/Epoxy Resin Multi‐Coupled Laminates With Extension‐Shearing Coupling Effect},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {11},
  pages = {10482--10496},
  doi = {10.1002/pc.70907}
}
Kostenlos starten →