EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Analysis of the Influence of Heat Treatments on the Flexibility of NiTi Alloy for Endodontic Instruments Manufacturing

Ihssen Abdelmomen iD, Marin Vincent iD, Frédéric Thiebaud, Julia Budzinski, Thierry Bastogne iD, Tarak Ben Zineb iD, Marc Engels-Deutsch iD

Materials · 28.04.2023 · 16 (9) · 3437

DOI: 10.3390/ma16093437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.04.2023. Verfasst von Ihssen Abdelmomen und 6 weiteren Autor:innen. Beteiligte Einrichtung: Université de Lorraine, CNRS, LEM3, F-54000 Nancy, France. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Association Nationale de la Recherche et de la Technologie, Coltene Micro-Mega (Besançon, France), Agence Nationale de Recherche Technologique (ANRT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The flexibility of NiTi based endodontic files is improved by heat treatment, leading to lower risk of failure, ledges, and canal transportation during the preparation of curved root canals. The aim of this study is to investigate and clearly highlight the influence of every parameter of heat treatment on the flexibility of NiTi wires and thus of endodontic instruments. A full factorial Design of Experiment (DoE) and a designed bending–torsion bench following the ISO 3630-1 standard were used for this investigation. Temperature, holding time, and cooling method were selected as contributing factors, while maximum bending moment, hysteresis size, and stiffness during martensitic transformation were selected as outputs. Regression analysis was performed to estimate the relationship between contributing and output variables to assess how the experimentation fits with the model. The experimental results showed that wires heated at 425 °C for 30 min are more flexible. Moreover, heat treatment temperature is the most critical factor influencing the flexibility and hysteresis size of the NiTi wire followed by the holding time, while the cooling method has a negligible effect. The regression analysis showed that the model is effective at predicting the relationship between contributing factors, bending moment response, and hysteresis size.

Schlagwörter

Stichwörter der Autor:innen

Nickel-Titaniumbendingendodontic filesheat-treatmentphase transformationshape memory alloystatistical design of experiments

Autor:innen und Institutionen

  • Université de Lorraine, CNRS, LEM3, F-54000 Nancy, France.
  • Faculté d'Odontologie de Lorraine, Université de Lorraine, F-54000 Nancy, France.
  • CYBERnano, F-54505 Nancy, France.
  • Université de Lorraine, CNRS, CRAN, F-54000 Nancy, France.

ORCID-Profile: Ihssen Abdelmomen, Marin Vincent, Thierry Bastogne, Tarak Ben Zineb, Marc Engels-Deutsch

Förderung

  • Association Nationale de la Recherche et de la Technologie
  • Coltene Micro-Mega (Besançon, France)
  • Agence Nationale de Recherche Technologique (ANRT)

Zitieren

APA

Abdelmomen, I., Vincent, M., Thiebaud, F., Budzinski, J., Bastogne, T., Ben Zineb, T., & Engels-Deutsch, M. (2023). Experimental Analysis of the Influence of Heat Treatments on the Flexibility of NiTi Alloy for Endodontic Instruments Manufacturing. Materials, 16(9), 3437. https://doi.org/10.3390/ma16093437

Vancouver

Abdelmomen I, Vincent M, Thiebaud F, Budzinski J, Bastogne T, Ben Zineb T, et al. Experimental Analysis of the Influence of Heat Treatments on the Flexibility of NiTi Alloy for Endodontic Instruments Manufacturing. Materials. 2023;16(9):3437. doi:10.3390/ma16093437

BibTeX
@article{Abdelmomen2023,
  author = {Abdelmomen, Ihssen and Vincent, Marin and Thiebaud, Frédéric and Budzinski, Julia and Bastogne, Thierry and Ben Zineb, Tarak and Engels-Deutsch, Marc},
  title = {Experimental Analysis of the Influence of Heat Treatments on the Flexibility of NiTi Alloy for Endodontic Instruments Manufacturing},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {9},
  pages = {3437},
  doi = {10.3390/ma16093437}
}
Kostenlos starten →