EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Scale Topology Optimization of Femoral Stem Structure Subject to Stress Shielding Reduce

Zhongmin Xiao, Longfei Wu, Wenqiang Wu, Ruizhi Tang, Jietao Dai, Dachang Zhu iD

Materials · 17.04.2023 · 16 (8) · 3151

DOI: 10.3390/ma16083151 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.04.2023. Verfasst von Zhongmin Xiao und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, Guangzhou University, Guangzhou 510006, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangzhou City School Joint Project, University Scientific Research Project of Eduction Bureau of Guangzhou Municipality.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hip replacement femoral implants are made of substantial materials that all have stiffness considerably higher than that of bone, which can cause significant bone resorption secondary to stress shielding and lead to severe complications. The topology optimization design method based on the uniform distribution of material micro-structure density can form a continuous mechanical transmission route, which can better solve the problem of reducing the stress shielding effect. A multi-scale parallel topology optimization method is proposed in this paper and a topological structure of type B femoral stem is derived. Using the traditional topology optimization method (Solid Isotropic Material with Penalization, SIMP), a topological structure of type A femoral stem is also derived. The sensitivity of the two kinds of femoral stems to the change of load direction is compared with the variation amplitude of the structural flexibility of the femoral stem. Furthermore, the finite element method is used to analyze the stress of type A and type B femoral stem under multiple conditions. Simulation and experimental results show that the average stress of type A and type B femoral stem on the femur are 14.80 MPa, 23.55 MPa, 16.94 MPa and 10.89 MPa, 20.92 MPa, 16.50 MPa, respectively. For type B femoral stem, the average error of strain is −1682με and the average relative error is 20.3% at the test points on the medial side and the mean error of strain is 1281με and the mean relative error is 19.5% at the test points on the outside.

Schlagwörter

Stichwörter der Autor:innen

femoral stemfinite element analysismulti-scale conditionsstress shieldingtopology optimization

Autor:innen und Institutionen

  • School of Mechanical and Electrical Engineering, Guangzhou University, Guangzhou 510006, China.

ORCID-Profile: Dachang Zhu

Förderung

  • Guangzhou City School Joint Project
  • University Scientific Research Project of Eduction Bureau of Guangzhou Municipality

Zitieren

APA

Xiao, Z., Wu, L., Wu, W., Tang, R., Dai, J., & Zhu, D. (2023). Multi-Scale Topology Optimization of Femoral Stem Structure Subject to Stress Shielding Reduce. Materials, 16(8), 3151. https://doi.org/10.3390/ma16083151

Vancouver

Xiao Z, Wu L, Wu W, Tang R, Dai J, Zhu D. Multi-Scale Topology Optimization of Femoral Stem Structure Subject to Stress Shielding Reduce. Materials. 2023;16(8):3151. doi:10.3390/ma16083151

BibTeX
@article{Xiao2023,
  author = {Xiao, Zhongmin and Wu, Longfei and Wu, Wenqiang and Tang, Ruizhi and Dai, Jietao and Zhu, Dachang},
  title = {Multi-Scale Topology Optimization of Femoral Stem Structure Subject to Stress Shielding Reduce},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {8},
  pages = {3151},
  doi = {10.3390/ma16083151}
}
Kostenlos starten →