EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Topology Optimization of a Femoral Stem in Titanium and Carbon to Reduce Stress Shielding with the FEM Method

Mario Ceddia, Bartolomeo Trentadue, Giuseppe De Giosa, Giuseppe Solarino

Journal of Composites Science · 20.07.2023 · 7 (7) · 298

DOI: 10.3390/jcs7070298 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 20.07.2023. Verfasst von Mario Ceddia und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Arthroplasty is commonly performed to treat advanced osteoarthritis or other degenerative joint conditions; however, it can also be considered for young patients with severe joint damage that significantly limits their functionality and quality of life. Young patients are still at risk of aseptic mobilization and bone resorption due to the phenomenon of stress shielding that causes an uneven distribution of tensions along the femoral contact surface prosthesis. This phenomenon can be limited by choosing the material of the prosthesis appropriately or by varying its stiffness, making sure that its mechanical behavior simulates that of the femur as much as possible. The aim of this study is to evaluate the mechanical strength of a prosthesis optimized both in shape and material and compare the results with a standard titanium prosthesis.

Methods

Through three-dimensional modeling and the use of finite element method (FEM) software such as ANSYS, the mechanical behavior of traditional prosthesis and prosthesis optimized topologically respecting the ASTM F2996-13 standard.

Results

With topological optimization, there is a stress reduction from 987 MPa to 810 MPa with a mass reduction of 30%. When carbon fiber is used, it is possible to further reduce stress to 509 MPa.

Conclusions

The reduction in stress on the femoral stem allows an optimal distribution of the load on the cortical bone, thus decreasing the problem of stress shielding.

Zitieren

APA

Ceddia, M., Trentadue, B., Giosa, G. D., & Solarino, G. (2023). Topology Optimization of a Femoral Stem in Titanium and Carbon to Reduce Stress Shielding with the FEM Method. Journal of Composites Science, 7(7), 298. https://doi.org/10.3390/jcs7070298

Vancouver

Ceddia M, Trentadue B, Giosa GD, Solarino G. Topology Optimization of a Femoral Stem in Titanium and Carbon to Reduce Stress Shielding with the FEM Method. Journal of Composites Science. 2023;7(7):298. doi:10.3390/jcs7070298

BibTeX
@article{Ceddia2023,
  author = {Ceddia, Mario and Trentadue, Bartolomeo and Giosa, Giuseppe De and Solarino, Giuseppe},
  title = {Topology Optimization of a Femoral Stem in Titanium and Carbon to Reduce Stress Shielding with the FEM Method},
  journal = {Journal of Composites Science},
  year = {2023},
  volume = {7},
  number = {7},
  pages = {298},
  doi = {10.3390/jcs7070298}
}
Kostenlos starten →